| 1 |
Imports SolidWorks.Interop
|
| 2 |
Imports SolidWorks.Interop.swconst
|
| 3 |
Imports SolidWorks.Interop.swpublished
|
| 4 |
|
| 5 |
Public Class InterCoqueCoque
|
| 6 |
Inherits InterFaceFace
|
| 7 |
|
| 8 |
Public sFaceCoque1 As SlyFaceCoque
|
| 9 |
Public sFaceCoque2 As SlyFaceCoque
|
| 10 |
|
| 11 |
Public AreteCoque1 As SldWorks.Edge
|
| 12 |
Public AreteCoque2 As SldWorks.Edge
|
| 13 |
|
| 14 |
''' <summary>
|
| 15 |
''' Sub qui dessine le sweep à l'endroit d'intersection
|
| 16 |
''' </summary>
|
| 17 |
''' <remarks>Je pourrais couper et mettre les faces internes ici, mais je préfère séparer...</remarks>
|
| 18 |
Public Function GénérerSweep(ByRef sketch As SldWorks.Sketch, ByVal rayon As Double) As SldWorks.Body2
|
| 19 |
|
| 20 |
Dim swEnt As SldWorks.Entity
|
| 21 |
|
| 22 |
|
| 23 |
|
| 24 |
' technique du sweep du cercle
|
| 25 |
' 1 - trace de la ligne d'intersection
|
| 26 |
' en théorie c'est déjà fait et on a interFF.sketch qui a le sketch d'intersection...
|
| 27 |
|
| 28 |
' 2- Placer un plan à l'extrémité
|
| 29 |
Dim Plan As SldWorks.RefPlane
|
| 30 |
|
| 31 |
Dim vSeg As Object 'SldWorks.SketchSegment
|
| 32 |
Dim seg As SldWorks.SketchSegment
|
| 33 |
Dim skPoint As SldWorks.SketchPoint = Nothing
|
| 34 |
|
| 35 |
|
| 36 |
vSeg = sketch.GetSketchSegments() : seg = vSeg(0)
|
| 37 |
|
| 38 |
Select Case seg.GetType ' faut faire attention, si le sketch est fermé, ça peut chier des taque pour séelectionner le point
|
| 39 |
Case swconst.swSketchSegments_e.swSketchLINE
|
| 40 |
Dim skline As SldWorks.SketchLine = seg
|
| 41 |
skPoint = skline.GetStartPoint2()
|
| 42 |
|
| 43 |
Case swconst.swSketchSegments_e.swSketchARC
|
| 44 |
Dim skarc As SldWorks.SketchArc = seg
|
| 45 |
skPoint = skarc.GetStartPoint2()
|
| 46 |
Case swconst.swSketchSegments_e.swSketchELLIPSE
|
| 47 |
Dim skellipse As SldWorks.SketchEllipse = seg
|
| 48 |
skPoint = skellipse.GetStartPoint2()
|
| 49 |
If skPoint Is Nothing Then
|
| 50 |
' couper l'ellipse
|
| 51 |
MsgBox("On a pas de startpoint sur cette ellipse")
|
| 52 |
End If
|
| 53 |
Case swconst.swSketchSegments_e.swSketchSPLINE
|
| 54 |
Dim skSpline As SldWorks.SketchSpline = seg
|
| 55 |
Dim vPoints As Object
|
| 56 |
vPoints = skSpline.GetPoints2()
|
| 57 |
skPoint = vPoints(0)
|
| 58 |
Case swconst.swSketchSegments_e.swSketchPARABOLA
|
| 59 |
Dim skPara As SldWorks.SketchParabola = seg
|
| 60 |
skPoint = skPara.GetStartPoint2()
|
| 61 |
Case Else
|
| 62 |
MsgBox(" Là y'a un problème! (case else....)")
|
| 63 |
End Select
|
| 64 |
|
| 65 |
seg.Select4(False, Nothing)
|
| 66 |
skPoint.Select4(True, Nothing)
|
| 67 |
|
| 68 |
Plan = swModel.CreatePlanePerCurveAndPassPoint3(True, False) ' le premier true met l'origine sur le point de la courbe, le second false est pour la visualisation.
|
| 69 |
|
| 70 |
' 3 - on créé un cercle sur le plan
|
| 71 |
'Dim rayon As Double
|
| 72 |
'Dim sface As SlyFaceCoque = Me.sFaceCoque
|
| 73 |
Dim feat As SldWorks.Feature
|
| 74 |
Dim sketchCercle As SldWorks.Sketch
|
| 75 |
|
| 76 |
' rayon = sface.GetEpaisseur
|
| 77 |
swEnt = Plan : swEnt.Select4(False, Nothing)
|
| 78 |
|
| 79 |
swModel.InsertSketch2(False)
|
| 80 |
swModel.CreateCircleByRadius2(0, 0, 0, rayon)
|
| 81 |
swModel.InsertSketch2(True)
|
| 82 |
|
| 83 |
feat = swModel.FeatureByPositionReverse(0)
|
| 84 |
sketchCercle = feat.GetSpecificFeature2()
|
| 85 |
|
| 86 |
' 4 - Sweep
|
| 87 |
Dim swFeatManager As SldWorks.FeatureManager = swModel.FeatureManager
|
| 88 |
|
| 89 |
Dim merge As Boolean = False
|
| 90 |
|
| 91 |
swEnt = sketchCercle : swEnt.Select2(False, 1)
|
| 92 |
swEnt = sketch : swEnt.Select2(True, 4)
|
| 93 |
|
| 94 |
feat = swFeatManager.InsertProtrusionSwept3(False, False, 0, False, False, 1, 1, False, 0, 0, 0, 0, merge, 1, 1, 0, 1) ' merge fait additionner le bnouveau corps... Pas certain du false qui suit.
|
| 95 |
|
| 96 |
If feat Is Nothing Then
|
| 97 |
swEnt = sketchCercle : swEnt.Select2(False, 1)
|
| 98 |
swEnt = sketch : swEnt.Select2(True, 4)
|
| 99 |
feat = swFeatManager.InsertProtrusionSwept3(False, False, 0, False, False, 0, 0, False, 0, 0, 0, 0, 0, 1, 1, 0, 1)
|
| 100 |
End If
|
| 101 |
|
| 102 |
If feat Is Nothing Then
|
| 103 |
' il est possible que la coque soit une spline
|
| 104 |
MsgBox("Il est impossible de découper la forme de la courbe, la coque est trop repliée sur elle-même..." & vbCr & "Un rayon de courbure de la section de la coque est inférieur à l'épaisseur de la coque", MsgBoxStyle.Information, "Impossible de découper à un endroit!")
|
| 105 |
' on pourrait éventuellement appliquer une autre méthode.
|
| 106 |
Return Nothing
|
| 107 |
End If
|
| 108 |
|
| 109 |
Dim vfaces As Object = feat.GetFaces
|
| 110 |
Dim swface As SldWorks.Face2 = vfaces(0)
|
| 111 |
Me.BodySweep = swface.GetBody
|
| 112 |
|
| 113 |
|
| 114 |
If Me.BodySweep Is Nothing Then MsgBox(feat.Name)
|
| 115 |
Return Me.BodySweep
|
| 116 |
|
| 117 |
End Function
|
| 118 |
|
| 119 |
''' <summary>
|
| 120 |
'''
|
| 121 |
''' </summary>
|
| 122 |
''' <param name="LaCoque"></param>
|
| 123 |
''' <param name="sweep"></param>
|
| 124 |
''' <remarks></remarks>
|
| 125 |
Public Sub DecouperCoque(ByRef LaCoque As SlyFaceCoque, ByRef sweep As SldWorks.Body2)
|
| 126 |
If Me.BodySweep Is Nothing Then Exit Sub
|
| 127 |
|
| 128 |
|
| 129 |
' on a un sketch avec 2 ou plusieurs segments à l'intérieur
|
| 130 |
' et si je sélectionnais un segment à la fois et partait un sketch3d, puis je convertis ce segment et construit ce nouveau sketch...
|
| 131 |
Dim vseg As Object = Me.sketch.GetSketchSegments
|
| 132 |
Dim PetitSketch As SldWorks.Sketch = Nothing
|
| 133 |
Dim swSketchManager As SldWorks.SketchManager = swModel.SketchManager
|
| 134 |
'Dim lstFeat As New Collections.Generic.List(Of SldWorks.Feature)
|
| 135 |
Dim swFace As SldWorks.Face2 = Me.BodySweep.GetFirstFace()
|
| 136 |
Dim swent As SldWorks.Entity
|
| 137 |
Dim featmanager As SldWorks.FeatureManager
|
| 138 |
Dim swface2 As SldWorks.Face2
|
| 139 |
Dim LautreCoque As SlyFaceCoque
|
| 140 |
LautreCoque = IIf(LaCoque Is Me.sFaceCoque1, Me.sFaceCoque2, Me.sFaceCoque1)
|
| 141 |
|
| 142 |
|
| 143 |
For Each segment As SldWorks.SketchSegment In vseg
|
| 144 |
swModel.ClearSelection()
|
| 145 |
If swModel.GetActiveSketch2() IsNot Nothing Then MsgBox("Déjà un sketch d'actif???")
|
| 146 |
swModel.Insert3DSketch2(False)
|
| 147 |
segment.Select4(False, Nothing)
|
| 148 |
swSketchManager.SketchUseEdge(False)
|
| 149 |
swModel.Insert3DSketch2(False)
|
| 150 |
swModel.EditRebuild3()
|
| 151 |
|
| 152 |
Dim feat As SldWorks.Feature = swModel.FeatureByPositionReverse(0)
|
| 153 |
If Not feat.GetTypeName() = "3DProfileFeature" Then MsgBox("Problème ici")
|
| 154 |
PetitSketch = feat.GetSpecificFeature2() ' devrait être un sketch
|
| 155 |
|
| 156 |
|
| 157 |
' 2 - Couper la coque à partir su sweep
|
| 158 |
swModel.EditRebuild3()
|
| 159 |
featmanager = swModel.FeatureManager
|
| 160 |
Dim faces() As SldWorks.Face2 = LaCoque.GetFaces ' les faces de la coque qui sont découpées
|
| 161 |
For Each swface2 In faces ' les faces de la coque
|
| 162 |
If swModel.ClosestDistance(swface2, sweep, Nothing, Nothing) < Epsilon Then
|
| 163 |
swModel.ClearSelection2(True)
|
| 164 |
swFace = sweep.GetFirstFace()
|
| 165 |
Do While swFace IsNot Nothing ' les faces coupantes (celles du sweep) ont un mark de 16
|
| 166 |
swent = swFace : swent.Select2(True, 16)
|
| 167 |
swFace = swFace.GetNextFace
|
| 168 |
Loop
|
| 169 |
LautreCoque.SelectionnerToutes(16, True)
|
| 170 |
|
| 171 |
swent = swface2 : swent.Select2(True, 32) ' la face qui est coupée
|
| 172 |
feat = featmanager.InsertSplitLineIntersect(7)
|
| 173 |
'If feat IsNot Nothing Then lstFeat.Add(feat)
|
| 174 |
End If
|
| 175 |
Next
|
| 176 |
sweep.HideBody(True)
|
| 177 |
|
| 178 |
' rajout des nouvelles faces à la coque
|
| 179 |
feat = swModel.FeatureByPositionReverse(0)
|
| 180 |
Dim vFaces As Object = feat.GetFaces()
|
| 181 |
For Each swFace In vFaces
|
| 182 |
LaCoque.AjouterFace(swFace)
|
| 183 |
Next
|
| 184 |
|
| 185 |
Next
|
| 186 |
End Sub
|
| 187 |
|
| 188 |
|
| 189 |
''' <summary>
|
| 190 |
''' Sub qui met les attributs de faces internes sur les bonnes faces.
|
| 191 |
''' </summary>
|
| 192 |
''' <remarks></remarks>
|
| 193 |
Public Sub MarquerFacesInternes(ByRef CoqueCoupante As SlyFaceCoque, ByRef CoqueCoupee As SlyFaceCoque)
|
| 194 |
' bon, là il faut trouver les faces internes... mais: la liste de faces dans la slyface
|
| 195 |
'mais j'ai maintenant un moyen de comparer les arètes.
|
| 196 |
Dim trouve As Boolean = False
|
| 197 |
' si une face de la liste des facesVol a une arête qui est comparer à true à une des arètes des faces de la coque, FACEINTERNE!!!
|
| 198 |
Dim swFaces() As SldWorks.Face2 = CoqueCoupee.GetFaces
|
| 199 |
Dim swAreteCoques() As SldWorks.Edge = CoqueCoupante.GetAretes
|
| 200 |
|
| 201 |
For Each face As SldWorks.Face2 In swFaces
|
| 202 |
Dim sFace As New SuperFace(face, True)
|
| 203 |
Dim swAreteVols() As SldWorks.Edge = sFace.GetAretes
|
| 204 |
For Each swAreteVol As SldWorks.Edge In swAreteVols
|
| 205 |
Dim e As New SuperArete(swAreteVol, True) : e.Colorer(2, 0, 1, 0)
|
| 206 |
For Each swAreteCoque As SldWorks.Edge In swAreteCoques
|
| 207 |
If e.comparer(swAreteCoque) Then
|
| 208 |
sFace.MettreAttributFaceInterne()
|
| 209 |
trouve = True : Exit For
|
| 210 |
End If
|
| 211 |
Next
|
| 212 |
If trouve Then trouve = False : Exit For ' on arete de gosser
|
| 213 |
Next
|
| 214 |
Next
|
| 215 |
|
| 216 |
|
| 217 |
End Sub
|
| 218 |
|
| 219 |
|
| 220 |
End Class
|
