| 1 |
//####//------------------------------------------------------------ |
| 2 |
//####//------------------------------------------------------------ |
| 3 |
//####// MAGiC |
| 4 |
//####// Jean Christophe Cuilliere et Vincent FRANCOIS |
| 5 |
//####// Departement de Genie Mecanique - UQTR |
| 6 |
//####//------------------------------------------------------------ |
| 7 |
//####// MAGIC est un projet de recherche de l equipe ERICCA |
| 8 |
//####// du departement de genie mecanique de l Universite du Quebec a Trois Rivieres |
| 9 |
//####// http://www.uqtr.ca/ericca |
| 10 |
//####// http://www.uqtr.ca/ |
| 11 |
//####//------------------------------------------------------------ |
| 12 |
//####//------------------------------------------------------------ |
| 13 |
//####// |
| 14 |
//####// mstruct_ves.cpp |
| 15 |
//####// |
| 16 |
//####//------------------------------------------------------------ |
| 17 |
//####//------------------------------------------------------------ |
| 18 |
//####// COPYRIGHT 2000-2024 |
| 19 |
//####// jeu 13 jun 2024 11:58:57 EDT |
| 20 |
//####//------------------------------------------------------------ |
| 21 |
//####//------------------------------------------------------------ |
| 22 |
#include "mstruct_ves.h" |
| 23 |
#include "mg_volume.h" |
| 24 |
#include "mg_geometrie.h" |
| 25 |
#include "mg_maillage.h" |
| 26 |
#include "fem_maillage.h" |
| 27 |
#include "mg_gestionnaire.h" |
| 28 |
#include "mstruct_groupe_volume.h" |
| 29 |
#include "mstruct_parametres.h" |
| 30 |
#include "mstruct_generateur_rsa.h" |
| 31 |
#include "mstruct_generateur_dcr.h" |
| 32 |
#include "mstruct_definition.h" |
| 33 |
#include "mstruct_analyse_champ.h" |
| 34 |
#include "mstruct_analyse_orientation.h" |
| 35 |
#include "mstruct_analyse_cao.h" |
| 36 |
#include "mstruct_analyse_propriete_massique.h" |
| 37 |
#include "mstruct_analyse_mg_maillage.h" |
| 38 |
#include "mstruct_analyse_fem_maillage.h" |
| 39 |
#include "mstruct_analyse_erosion.h" |
| 40 |
#include "mstruct_analyse_modules_elasticite.h" |
| 41 |
#include "mstruct_analyse_conductivite_thermique.h" |
| 42 |
#include "mstruct_analyse_energie_hill.h" |
| 43 |
#include "mg_cg_modele.h" |
| 44 |
#include "mg_cg_assemblage.h" |
| 45 |
#include "mg_sous_geometrie.h" |
| 46 |
#include "mg_cg_forme_multi_volume.h" |
| 47 |
#include "mg_cg_info.h" |
| 48 |
#include "mg_file.h" |
| 49 |
#include "fct_taille_fem_solution_generateur_microstructure.h" |
| 50 |
#include "mailleur3d_couche.h" |
| 51 |
#include "mailleur0d.h" |
| 52 |
#include "mailleur1d.h" |
| 53 |
#include "mailleur2d.h" |
| 54 |
#include "mailleur3d.h" |
| 55 |
#include "mailleur_fem.h" |
| 56 |
#include "mailleur3d_structure.h" |
| 57 |
#include "mailleur_analyse.h" |
| 58 |
#include <fstream> |
| 59 |
#include "mgaster.h" |
| 60 |
#include "ot_cpu.h" |
| 61 |
#include "mstruct_outils.h" |
| 62 |
#include "mg_cg_groupe_forme.h" |
| 63 |
#include "mstruct_ves_file.h" |
| 64 |
#include "fem_triangle3.h" |
| 65 |
#include "fem_triangle6.h" |
| 66 |
#include "fem_tetra4.h" |
| 67 |
#include "fem_tetra10.h" |
| 68 |
#include "fem_penta6.h" |
| 69 |
#include "fem_penta15.h" |
| 70 |
#include "mg_hexa.h" |
| 71 |
#include "tpl_grille.h" |
| 72 |
#include "parse.h" |
| 73 |
#include "pars_argument.h" |
| 74 |
#include "ot_geometrie.h" |
| 75 |
MSTRUCT_VES::MSTRUCT_VES(OT_PARAMETRES *param) |
| 76 |
{ |
| 77 |
m_mg_gestionnaire=new MG_GESTIONNAIRE; |
| 78 |
m_mg_geometrie=NULL; |
| 79 |
m_mgcg_modele=NULL; |
| 80 |
m_mgcg_assemblage=NULL; |
| 81 |
m_mg_maillage=NULL; |
| 82 |
m_fem_maillage=NULL; |
| 83 |
m_ves_file=new MSTRUCT_VES_FILE; |
| 84 |
int decoup=(int)param->get_valeur("Avec_decoup"); |
| 85 |
if (decoup==0) change_boite_3D_ves(BOITE_3D(0.0,0.0,0.0,1.0,1.0,1.0)); |
| 86 |
else |
| 87 |
{ |
| 88 |
double xmin=(double)param->get_valeur("Boite3D_ves_Xmin"); |
| 89 |
double ymin=(double)param->get_valeur("Boite3D_ves_Ymin"); |
| 90 |
double zmin=(double)param->get_valeur("Boite3D_ves_Zmin"); |
| 91 |
double xmax=(double)param->get_valeur("Boite3D_ves_Xmax"); |
| 92 |
double ymax=(double)param->get_valeur("Boite3D_ves_Ymax"); |
| 93 |
double zmax=(double)param->get_valeur("Boite3D_ves_Zmax"); |
| 94 |
change_boite_3D_ves(BOITE_3D(xmin,ymin,zmin,xmax,ymax,zmax)); |
| 95 |
} |
| 96 |
change_precision(1.0e-06); |
| 97 |
change_temps_geometrie(0.0); |
| 98 |
change_temps_carte(0.0); |
| 99 |
change_temps_maillage(0.0); |
| 100 |
change_temps_fem_maillage(0.0); |
| 101 |
change_temps_etude(0.0); |
| 102 |
change_temps_calcul(0.0); |
| 103 |
change_temps_analyse(0.0); |
| 104 |
} |
| 105 |
|
| 106 |
MSTRUCT_VES::MSTRUCT_VES(char* fichier_ves) |
| 107 |
{ |
| 108 |
m_ves_file=new MSTRUCT_VES_FILE; |
| 109 |
m_ves_file->ouvrir(fichier_ves); |
| 110 |
m_mg_gestionnaire = new MG_FILE(m_ves_file->get_nom_fichier_magic()); |
| 111 |
if(m_ves_file->get_id_mgcg_modele()>0) m_mgcg_modele = m_mg_gestionnaire->get_mgcg_modeleid(m_ves_file->get_id_mgcg_modele()); |
| 112 |
else m_mgcg_modele=NULL; |
| 113 |
if(m_ves_file->get_id_mgcg_assemblage()>0) m_mgcg_assemblage = m_mgcg_modele->get_mgcg_assemblageid(m_ves_file->get_id_mgcg_assemblage()); |
| 114 |
else m_mgcg_assemblage=NULL; |
| 115 |
if(m_ves_file->get_id_mg_geometrie()>0) m_mg_geometrie = m_mg_gestionnaire->get_mg_geometrieid(m_ves_file->get_id_mg_geometrie()); |
| 116 |
else m_mg_geometrie = NULL; |
| 117 |
if(m_ves_file->get_id_mg_maillage()>0) m_mg_maillage = m_mg_gestionnaire->get_mg_maillageid(m_ves_file->get_id_mg_maillage()); |
| 118 |
else m_mg_maillage = NULL; |
| 119 |
if(m_ves_file->get_id_fem_maillage()>0) m_fem_maillage = m_mg_gestionnaire->get_fem_maillageid(m_ves_file->get_id_fem_maillage()); |
| 120 |
else m_fem_maillage = NULL; |
| 121 |
} |
| 122 |
|
| 123 |
MSTRUCT_VES::~MSTRUCT_VES(void) |
| 124 |
{ |
| 125 |
delete m_mg_gestionnaire; |
| 126 |
delete m_ves_file; |
| 127 |
} |
| 128 |
|
| 129 |
MG_GESTIONNAIRE* MSTRUCT_VES::get_mg_gestionnaire(void) |
| 130 |
{ |
| 131 |
return m_mg_gestionnaire; |
| 132 |
} |
| 133 |
|
| 134 |
void MSTRUCT_VES::change_mg_gestionnaire(MG_GESTIONNAIRE* gest) |
| 135 |
{ |
| 136 |
m_mg_gestionnaire=gest; |
| 137 |
} |
| 138 |
|
| 139 |
void MSTRUCT_VES::change_mg_geometrie(MG_GEOMETRIE* mg_geometrie) |
| 140 |
{ |
| 141 |
m_mg_geometrie=mg_geometrie; |
| 142 |
m_ves_file->change_id_mg_geometrie(m_mg_geometrie->get_id()); |
| 143 |
} |
| 144 |
|
| 145 |
MG_GEOMETRIE* MSTRUCT_VES::get_mg_geometrie(void) |
| 146 |
{ |
| 147 |
return m_mg_geometrie; |
| 148 |
} |
| 149 |
|
| 150 |
void MSTRUCT_VES::change_mgcg_assemblage(MG_CG_ASSEMBLAGE* mgcg_assemblage) |
| 151 |
{ |
| 152 |
m_mgcg_assemblage=mgcg_assemblage; |
| 153 |
if (m_mgcg_assemblage!=NULL) m_ves_file->change_id_mgcg_assemblage(m_mgcg_assemblage->get_id()); |
| 154 |
else m_ves_file->change_id_mgcg_assemblage(-1); |
| 155 |
} |
| 156 |
|
| 157 |
MG_CG_ASSEMBLAGE* MSTRUCT_VES::get_mgcg_assemblage(void) |
| 158 |
{ |
| 159 |
return m_mgcg_assemblage; |
| 160 |
} |
| 161 |
|
| 162 |
void MSTRUCT_VES::change_mgcg_modele(MG_CG_MODELE* mgcg_modele) |
| 163 |
{ |
| 164 |
m_mgcg_modele=mgcg_modele; |
| 165 |
if (m_mgcg_modele!=NULL) m_ves_file->change_id_mgcg_modele(m_mgcg_modele->get_id()); |
| 166 |
else m_ves_file->change_id_mgcg_modele(-1); |
| 167 |
} |
| 168 |
|
| 169 |
MG_CG_MODELE* MSTRUCT_VES::get_mgcg_modele(void) |
| 170 |
{ |
| 171 |
return m_mgcg_modele; |
| 172 |
} |
| 173 |
|
| 174 |
MG_MAILLAGE* MSTRUCT_VES::get_mg_maillage(void) |
| 175 |
{ |
| 176 |
return m_mg_maillage; |
| 177 |
} |
| 178 |
|
| 179 |
void MSTRUCT_VES::change_mg_maillage(MG_MAILLAGE* mg_maillage) |
| 180 |
{ |
| 181 |
m_mg_maillage=mg_maillage; |
| 182 |
m_ves_file->change_id_mg_maillage(m_mg_maillage->get_id()); |
| 183 |
} |
| 184 |
|
| 185 |
FEM_MAILLAGE* MSTRUCT_VES::get_fem_maillage(void) |
| 186 |
{ |
| 187 |
return m_fem_maillage; |
| 188 |
} |
| 189 |
|
| 190 |
void MSTRUCT_VES::change_fem_maillage(FEM_MAILLAGE* fem_maillage) |
| 191 |
{ |
| 192 |
m_fem_maillage=fem_maillage; |
| 193 |
m_ves_file->change_id_fem_maillage(m_fem_maillage->get_id()); |
| 194 |
} |
| 195 |
|
| 196 |
BOITE_3D MSTRUCT_VES::get_boite3d_ves(void) |
| 197 |
{ |
| 198 |
return m_ves_file->get_boite_3D_ves(); |
| 199 |
} |
| 200 |
|
| 201 |
void MSTRUCT_VES::change_boite_3D_ves(BOITE_3D boite3D) |
| 202 |
{ |
| 203 |
m_ves_file->change_boite_3D_ves(boite3D); |
| 204 |
} |
| 205 |
|
| 206 |
double MSTRUCT_VES::get_precision(void) |
| 207 |
{ |
| 208 |
return m_ves_file->get_precision(); |
| 209 |
} |
| 210 |
|
| 211 |
void MSTRUCT_VES::change_precision(double precision) |
| 212 |
{ |
| 213 |
m_ves_file->change_precision(precision); |
| 214 |
} |
| 215 |
|
| 216 |
double MSTRUCT_VES::get_temps_geometrie(void) |
| 217 |
{ |
| 218 |
return m_ves_file->get_temps_geometrie(); |
| 219 |
} |
| 220 |
|
| 221 |
void MSTRUCT_VES::change_temps_geometrie(double temps) |
| 222 |
{ |
| 223 |
m_ves_file->change_temps_geometrie(temps); |
| 224 |
} |
| 225 |
|
| 226 |
double MSTRUCT_VES::get_temps_materiau(void) |
| 227 |
{ |
| 228 |
return m_ves_file->get_temps_materiau(); |
| 229 |
} |
| 230 |
|
| 231 |
void MSTRUCT_VES::change_temps_materiau(double temps) |
| 232 |
{ |
| 233 |
m_ves_file->change_temps_materiau(temps); |
| 234 |
} |
| 235 |
|
| 236 |
double MSTRUCT_VES::get_temps_carte(void) |
| 237 |
{ |
| 238 |
return m_ves_file->get_temps_carte(); |
| 239 |
} |
| 240 |
|
| 241 |
void MSTRUCT_VES::change_temps_carte(double temps) |
| 242 |
{ |
| 243 |
m_ves_file->change_temps_carte(temps); |
| 244 |
} |
| 245 |
|
| 246 |
double MSTRUCT_VES::get_temps_maillage(void) |
| 247 |
{ |
| 248 |
return m_ves_file->get_temps_maillage(); |
| 249 |
} |
| 250 |
|
| 251 |
void MSTRUCT_VES::change_temps_maillage(double temps) |
| 252 |
{ |
| 253 |
m_ves_file->change_temps_maillage(temps); |
| 254 |
} |
| 255 |
|
| 256 |
double MSTRUCT_VES::get_temps_fem_maillage(void) |
| 257 |
{ |
| 258 |
return m_ves_file->get_temps_fem_maillage(); |
| 259 |
} |
| 260 |
|
| 261 |
void MSTRUCT_VES::change_temps_fem_maillage(double temps) |
| 262 |
{ |
| 263 |
m_ves_file->change_temps_fem_maillage(temps); |
| 264 |
} |
| 265 |
|
| 266 |
double MSTRUCT_VES::get_temps_etude(void) |
| 267 |
{ |
| 268 |
return m_ves_file->get_temps_etude(); |
| 269 |
} |
| 270 |
|
| 271 |
void MSTRUCT_VES::change_temps_etude(double temps) |
| 272 |
{ |
| 273 |
m_ves_file->change_temps_etude(temps); |
| 274 |
} |
| 275 |
|
| 276 |
double MSTRUCT_VES::get_temps_calcul(void) |
| 277 |
{ |
| 278 |
return m_ves_file->get_temps_calcul(); |
| 279 |
} |
| 280 |
|
| 281 |
void MSTRUCT_VES::change_temps_calcul(double temps) |
| 282 |
{ |
| 283 |
m_ves_file->change_temps_calcul(temps); |
| 284 |
} |
| 285 |
|
| 286 |
double MSTRUCT_VES::get_temps_analyse(void) |
| 287 |
{ |
| 288 |
return m_ves_file->get_temps_analyse(); |
| 289 |
} |
| 290 |
|
| 291 |
void MSTRUCT_VES::change_temps_analyse(double temps) |
| 292 |
{ |
| 293 |
m_ves_file->change_temps_analyse(temps); |
| 294 |
} |
| 295 |
|
| 296 |
long int MSTRUCT_VES::get_nb_analyse(void) |
| 297 |
{ |
| 298 |
return m_ves_file->get_nb_analyse(); |
| 299 |
} |
| 300 |
|
| 301 |
int MSTRUCT_VES::ajouter_analyse(MSTRUCT_ANALYSE* analyse_ves) |
| 302 |
{ |
| 303 |
return m_ves_file->ajouter_analyse(analyse_ves); |
| 304 |
} |
| 305 |
|
| 306 |
MSTRUCT_ANALYSE* MSTRUCT_VES::get_premiere_analyse(std::map< std::string, MSTRUCT_ANALYSE* >::iterator& it) |
| 307 |
{ |
| 308 |
return m_ves_file->get_premiere_analyse(it); |
| 309 |
} |
| 310 |
|
| 311 |
MSTRUCT_ANALYSE* MSTRUCT_VES::get_suivante_analyse(std::map< std::string, MSTRUCT_ANALYSE* >::iterator& it) |
| 312 |
{ |
| 313 |
return m_ves_file->get_suivante_analyse(it); |
| 314 |
} |
| 315 |
|
| 316 |
MSTRUCT_ANALYSE* MSTRUCT_VES::get_analyse(std::string identifiant) |
| 317 |
{ |
| 318 |
return m_ves_file->get_analyse(identifiant); |
| 319 |
} |
| 320 |
|
| 321 |
int MSTRUCT_VES::supprimer_analyse(std::string identifiant) |
| 322 |
{ |
| 323 |
return m_ves_file->supprimer_analyse(identifiant); |
| 324 |
} |
| 325 |
|
| 326 |
int MSTRUCT_VES::supprimer_tout_analyse(void) |
| 327 |
{ |
| 328 |
return m_ves_file->supprimer_tout_analyse(); |
| 329 |
} |
| 330 |
|
| 331 |
|
| 332 |
int MSTRUCT_VES::generer_geometrie(std::vector< OT_PARAMETRES* >& vector_params_geometrie) |
| 333 |
{ |
| 334 |
OT_CPU ot_cpu; |
| 335 |
ot_cpu.initialise(); |
| 336 |
MSTRUCT_GENERATEUR* generateur=NULL; |
| 337 |
std::vector<OT_PARAMETRES*>::iterator it; |
| 338 |
for(it=vector_params_geometrie.begin();it!=vector_params_geometrie.end();it++) |
| 339 |
{ |
| 340 |
OT_PARAMETRES* param = *it; |
| 341 |
if(((int)param->get_valeur((char*)"Type_generateur"))==MSTRUCT::TYPE_GENERATEUR::RSA) |
| 342 |
{ |
| 343 |
std::string Nom_mgcg_modele = param->get_nom((char*)"Nom_mgcg_modele"); |
| 344 |
MSTRUCT_GENERATEUR_RSA *RSA; |
| 345 |
if(generateur==NULL) |
| 346 |
{ |
| 347 |
RSA = new MSTRUCT_GENERATEUR_RSA(m_mg_gestionnaire,(char*)Nom_mgcg_modele.c_str()); |
| 348 |
generateur=RSA; |
| 349 |
RSA->active_affichage(fonc_affiche); |
| 350 |
} |
| 351 |
|
| 352 |
double Boite3D_distribution_Xmin = param->get_valeur((char*)"Boite3D_distribution_Xmin"); |
| 353 |
double Boite3D_distribution_Ymin = param->get_valeur((char*)"Boite3D_distribution_Ymin"); |
| 354 |
double Boite3D_distribution_Zmin = param->get_valeur((char*)"Boite3D_distribution_Zmin"); |
| 355 |
double Boite3D_distribution_Xmax = param->get_valeur((char*)"Boite3D_distribution_Xmax"); |
| 356 |
double Boite3D_distribution_Ymax = param->get_valeur((char*)"Boite3D_distribution_Ymax"); |
| 357 |
double Boite3D_distribution_Zmax = param->get_valeur((char*)"Boite3D_distribution_Zmax"); |
| 358 |
BOITE_3D Boite3D_distribution(Boite3D_distribution_Xmin, |
| 359 |
Boite3D_distribution_Ymin, |
| 360 |
Boite3D_distribution_Zmin, |
| 361 |
Boite3D_distribution_Xmax, |
| 362 |
Boite3D_distribution_Ymax, |
| 363 |
Boite3D_distribution_Zmax); |
| 364 |
RSA->change_boite3d_distribution(Boite3D_distribution); |
| 365 |
//---------------------------------------------------------------------- |
| 366 |
//Ajouter decoupage pour RSA |
| 367 |
//---------------------------------------------------------------------- |
| 368 |
|
| 369 |
int decoup=(int)param->get_valeur((char*)"Avec_decoup"); |
| 370 |
if (decoup==1) |
| 371 |
{ |
| 372 |
double Boite3D_ves_Xmin = param->get_valeur((char*)"Boite3D_ves_Xmin"); |
| 373 |
double Boite3D_ves_Ymin = param->get_valeur((char*)"Boite3D_ves_Ymin"); |
| 374 |
double Boite3D_ves_Zmin = param->get_valeur((char*)"Boite3D_ves_Zmin"); |
| 375 |
double Boite3D_ves_Xmax = param->get_valeur((char*)"Boite3D_ves_Xmax"); |
| 376 |
double Boite3D_ves_Ymax = param->get_valeur((char*)"Boite3D_ves_Ymax"); |
| 377 |
double Boite3D_ves_Zmax = param->get_valeur((char*)"Boite3D_ves_Zmax"); |
| 378 |
BOITE_3D Boite3D_ves(Boite3D_ves_Xmin,Boite3D_ves_Ymin,Boite3D_ves_Zmin,Boite3D_ves_Xmax,Boite3D_ves_Ymax,Boite3D_ves_Zmax); |
| 379 |
RSA->change_boite3d_ves(Boite3D_ves); |
| 380 |
} |
| 381 |
//---------------------------------------------------------------------- |
| 382 |
double Nb_pas_X = param->get_valeur((char*)"Nb_pas_X"); |
| 383 |
double Nb_pas_Y = param->get_valeur((char*)"Nb_pas_Y"); |
| 384 |
double Nb_pas_Z = param->get_valeur((char*)"Nb_pas_Z"); |
| 385 |
RSA->change_nb_pas_grille(Nb_pas_X); |
| 386 |
double Distance_min_inter_volume = param->get_valeur((char*)"Distance_min_inter_volume"); |
| 387 |
RSA->change_distance_inter_volume_min(Distance_min_inter_volume); |
| 388 |
double Volume_min = param->get_valeur((char*)"Volume_min"); |
| 389 |
RSA->change_volume_min(Volume_min); |
| 390 |
double Aire_min = param->get_valeur((char*)"Aire_min"); |
| 391 |
RSA->change_aire_min(Aire_min); |
| 392 |
double Longueur_min = param->get_valeur((char*)"Longueur_min"); |
| 393 |
RSA->change_longueur_min(Longueur_min); |
| 394 |
double Angle_min = param->get_valeur((char*)"Angle_min"); |
| 395 |
RSA->change_angle_min(Angle_min); |
| 396 |
double Nb_iteration_max = param->get_valeur((char*)"Nb_iteration_max"); |
| 397 |
RSA->change_nb_iteration_max(Nb_iteration_max); |
| 398 |
bool Avec_intersections = (bool)param->get_valeur((char*)"Avec_intersections"); |
| 399 |
RSA->change_intersection_bords_ves(Avec_intersections); |
| 400 |
std::string Nom_groupe_inclusion = param->get_nom((char*)"Nom_groupe_inclusion"); |
| 401 |
char message[1000]; |
| 402 |
sprintf(message,"Generateur RSA : %s",Nom_groupe_inclusion.c_str()); |
| 403 |
affiche(message); |
| 404 |
int Type_inclusion = param->get_valeur((char*)"Type_inclusion"); |
| 405 |
double Fraction_volumique_cible = param->get_valeur((char*)"Fraction_volumique_cible"); |
| 406 |
double Eps_fraction_volumique = param->get_valeur((char*)"Eps_fraction_volumique"); |
| 407 |
bool Porosite = (bool)param->get_valeur((char*)"Porosite"); |
| 408 |
std::string multicouche = param->get_nom((char*)"Multicouche"); |
| 409 |
PARS_ARGUMENT parse_param[100]; |
| 410 |
PARSE parse; |
| 411 |
parse.decode(multicouche.c_str(),"@,(&)",parse_param); |
| 412 |
std::vector<double> *vector_epaisseur=NULL; |
| 413 |
int nb_couche = atoi(parse_param[0].argument[0].c_str()); |
| 414 |
if(nb_couche>0) |
| 415 |
{ |
| 416 |
vector_epaisseur=new std::vector<double>; |
| 417 |
for(int i=0;i<nb_couche;i++) |
| 418 |
{ |
| 419 |
double epaisseur=atof(parse_param[1].argument[i].c_str()); |
| 420 |
vector_epaisseur->push_back(epaisseur); |
| 421 |
} |
| 422 |
} |
| 423 |
if(Type_inclusion==MSTRUCT::TYPE_INCLUSION::SPHERE) |
| 424 |
{ |
| 425 |
double Mu_rayon = param->get_valeur((char*)"Mu_rayon"); |
| 426 |
double Sigma_rayon = param->get_valeur((char*)"Sigma_rayon"); |
| 427 |
double Type_distribution_rayon = param->get_valeur((char*)"Type_distribution_rayon"); |
| 428 |
double fraction_volumique_actuelle=0.0; |
| 429 |
RSA->tirrage_aleatoire_sphere(Nom_groupe_inclusion,Mu_rayon,Sigma_rayon,Type_distribution_rayon,Fraction_volumique_cible,Eps_fraction_volumique,fraction_volumique_actuelle,vector_epaisseur,Porosite); |
| 430 |
} |
| 431 |
else if(Type_inclusion==MSTRUCT::TYPE_INCLUSION::CYLINDRE) |
| 432 |
{ |
| 433 |
double Mu_rayon = param->get_valeur((char*)"Mu_rayon"); |
| 434 |
double Sigma_rayon = param->get_valeur((char*)"Sigma_rayon"); |
| 435 |
double Type_distribution_rayon = param->get_valeur((char*)"Type_distribution_rayon"); |
| 436 |
double Mu_longueur = param->get_valeur((char*)"Mu_longueur"); |
| 437 |
double Sigma_longueur = param->get_valeur((char*)"Sigma_longueur"); |
| 438 |
double Type_distribution_longueur = param->get_valeur((char*)"Type_distribution_longueur"); |
| 439 |
double Mu_theta = param->get_valeur((char*)"Mu_theta"); |
| 440 |
double Sigma_theta = param->get_valeur((char*)"Sigma_theta"); |
| 441 |
double Type_distribution_theta = param->get_valeur((char*)"Type_distribution_theta"); |
| 442 |
double Mu_phi = param->get_valeur((char*)"Mu_phi"); |
| 443 |
double Sigma_phi = param->get_valeur((char*)"Sigma_phi"); |
| 444 |
double Type_distribution_phi = param->get_valeur((char*)"Type_distribution_phi"); |
| 445 |
double fraction_volumique_actuelle=0.0; |
| 446 |
RSA->tirrage_aleatoire_cylindre(Nom_groupe_inclusion, |
| 447 |
Mu_rayon,Sigma_rayon,Type_distribution_rayon, |
| 448 |
Mu_longueur,Sigma_longueur,Type_distribution_longueur, |
| 449 |
Mu_theta,Sigma_theta,Type_distribution_theta, |
| 450 |
Mu_phi,Sigma_phi,Type_distribution_phi, |
| 451 |
Fraction_volumique_cible,Eps_fraction_volumique,fraction_volumique_actuelle, |
| 452 |
vector_epaisseur, |
| 453 |
Porosite); |
| 454 |
} |
| 455 |
//---------------------------------------------------------------------------------- |
| 456 |
else if(Type_inclusion==MSTRUCT::TYPE_INCLUSION::TORUS) |
| 457 |
{ |
| 458 |
double Mu_rayon_cercle = param->get_valeur((char*)"Mu_rayon_cercle"); |
| 459 |
double Sigma_rayon_cercle = param->get_valeur((char*)"Sigma_rayon_cercle"); |
| 460 |
double Type_distribution_rayon_cercle = param->get_valeur((char*)"Type_distribution_rayon_cercle"); |
| 461 |
|
| 462 |
double Mu_rayon_tore = param->get_valeur((char*)"Mu_rayon_tore"); |
| 463 |
double Sigma_rayon_tore = param->get_valeur((char*)"Sigma_rayon_tore"); |
| 464 |
double Type_distribution_rayon_tore = param->get_valeur((char*)"Type_distribution_rayon_tore"); |
| 465 |
|
| 466 |
double Mu_theta = param->get_valeur((char*)"Mu_theta"); |
| 467 |
double Sigma_theta = param->get_valeur((char*)"Sigma_theta"); |
| 468 |
double Type_distribution_theta = param->get_valeur((char*)"Type_distribution_theta"); |
| 469 |
|
| 470 |
double Mu_phi = param->get_valeur((char*)"Mu_phi"); |
| 471 |
double Sigma_phi = param->get_valeur((char*)"Sigma_phi"); |
| 472 |
double Type_distribution_phi = param->get_valeur((char*)"Type_distribution_phi"); |
| 473 |
|
| 474 |
|
| 475 |
|
| 476 |
|
| 477 |
double Mu_angle_seg = param->get_valeur((char*)"Mu_longueur"); |
| 478 |
double Sigma_angle_seg = param->get_valeur((char*)"Sigma_longueur"); |
| 479 |
double Type_distribution_angle_seg = param->get_valeur((char*)"Type_distribution_longueur"); |
| 480 |
Mu_angle_seg=Mu_angle_seg/Mu_rayon_cercle; |
| 481 |
Sigma_angle_seg=Sigma_angle_seg/Mu_rayon_cercle; |
| 482 |
|
| 483 |
|
| 484 |
|
| 485 |
double fraction_volumique_actuelle=0.0; |
| 486 |
RSA->tirrage_aleatoire_torus(Nom_groupe_inclusion, |
| 487 |
Mu_rayon_cercle,Sigma_rayon_cercle,Type_distribution_rayon_cercle, |
| 488 |
Mu_rayon_tore,Sigma_rayon_tore,Type_distribution_rayon_tore, |
| 489 |
Mu_theta,Sigma_theta,Type_distribution_theta, |
| 490 |
Mu_phi,Sigma_phi,Type_distribution_phi, |
| 491 |
Mu_angle_seg, Sigma_angle_seg, Type_distribution_angle_seg, |
| 492 |
Fraction_volumique_cible,Eps_fraction_volumique,fraction_volumique_actuelle, |
| 493 |
vector_epaisseur, |
| 494 |
Porosite); |
| 495 |
} |
| 496 |
//--------------------------------------------------------------------------- |
| 497 |
else if(Type_inclusion==MSTRUCT::TYPE_INCLUSION::ELLIPSOIDE) |
| 498 |
{ |
| 499 |
double Mu_rayon_majeur = param->get_valeur((char*)"Mu_rayon_majeur"); |
| 500 |
double Sigma_rayon_majeur = param->get_valeur((char*)"Sigma_rayon_majeur"); |
| 501 |
double Type_distribution_rayon_majeur = param->get_valeur((char*)"Type_distribution_rayon_majeur"); |
| 502 |
double Mu_rayon_mineur = param->get_valeur((char*)"Mu_rayon_mineur"); |
| 503 |
double Sigma_rayon_mineur = param->get_valeur((char*)"Sigma_rayon_mineur"); |
| 504 |
double Type_distribution_rayon_mineur = param->get_valeur((char*)"Type_distribution_rayon_mineur"); |
| 505 |
double Mu_theta = param->get_valeur((char*)"Mu_theta"); |
| 506 |
double Sigma_theta = param->get_valeur((char*)"Sigma_theta"); |
| 507 |
double Type_distribution_theta = param->get_valeur((char*)"Type_distribution_theta"); |
| 508 |
double Mu_phi = param->get_valeur((char*)"Mu_phi"); |
| 509 |
double Sigma_phi = param->get_valeur((char*)"Sigma_phi"); |
| 510 |
double Type_distribution_phi = param->get_valeur((char*)"Type_distribution_phi"); |
| 511 |
double fraction_volumique_actuelle=0.0; |
| 512 |
RSA->tirrage_aleatoire_ellipsoide(Nom_groupe_inclusion, |
| 513 |
Mu_rayon_majeur,Sigma_rayon_majeur,Type_distribution_rayon_majeur, |
| 514 |
Mu_rayon_mineur,Sigma_rayon_mineur,Type_distribution_rayon_mineur, |
| 515 |
Mu_theta,Sigma_theta,Type_distribution_theta, |
| 516 |
Mu_phi,Sigma_phi,Type_distribution_phi, |
| 517 |
Fraction_volumique_cible,Eps_fraction_volumique,fraction_volumique_actuelle, |
| 518 |
vector_epaisseur, |
| 519 |
Porosite); |
| 520 |
} |
| 521 |
if(vector_epaisseur!=NULL) delete vector_epaisseur; |
| 522 |
} |
| 523 |
else if(((int)param->get_valeur((char*)"Type_generateur"))==MSTRUCT::TYPE_GENERATEUR::DCR) |
| 524 |
{ |
| 525 |
#ifdef PROJECT_CHRONO |
| 526 |
std::string Nom_mgcg_modele = param->get_nom((char*)"Nom_mgcg_modele"); |
| 527 |
MSTRUCT_GENERATEUR_DCR *DCR; |
| 528 |
if(generateur==NULL) |
| 529 |
{ |
| 530 |
DCR = new MSTRUCT_GENERATEUR_DCR(m_mg_gestionnaire,(char*)Nom_mgcg_modele.c_str()); |
| 531 |
generateur=DCR; |
| 532 |
DCR->active_affichage(fonc_affiche); |
| 533 |
} |
| 534 |
double Boite3D_distribution_Xmin = param->get_valeur((char*)"Boite3D_distribution_Xmin"); |
| 535 |
double Boite3D_distribution_Ymin = param->get_valeur((char*)"Boite3D_distribution_Ymin"); |
| 536 |
double Boite3D_distribution_Zmin = param->get_valeur((char*)"Boite3D_distribution_Zmin"); |
| 537 |
double Boite3D_distribution_Xmax = param->get_valeur((char*)"Boite3D_distribution_Xmax"); |
| 538 |
double Boite3D_distribution_Ymax = param->get_valeur((char*)"Boite3D_distribution_Ymax"); |
| 539 |
double Boite3D_distribution_Zmax = param->get_valeur((char*)"Boite3D_distribution_Zmax"); |
| 540 |
BOITE_3D Boite3D_distribution(Boite3D_distribution_Xmin, |
| 541 |
Boite3D_distribution_Ymin, |
| 542 |
Boite3D_distribution_Zmin, |
| 543 |
Boite3D_distribution_Xmax, |
| 544 |
Boite3D_distribution_Ymax, |
| 545 |
Boite3D_distribution_Zmax); |
| 546 |
DCR->change_boite3d_distribution(Boite3D_distribution); |
| 547 |
int decoup=(int)param->get_valeur((char*)"Avec_decoup"); |
| 548 |
if (decoup==1) |
| 549 |
{ |
| 550 |
double Boite3D_ves_Xmin = param->get_valeur((char*)"Boite3D_ves_Xmin"); |
| 551 |
double Boite3D_ves_Ymin = param->get_valeur((char*)"Boite3D_ves_Ymin"); |
| 552 |
double Boite3D_ves_Zmin = param->get_valeur((char*)"Boite3D_ves_Zmin"); |
| 553 |
double Boite3D_ves_Xmax = param->get_valeur((char*)"Boite3D_ves_Xmax"); |
| 554 |
double Boite3D_ves_Ymax = param->get_valeur((char*)"Boite3D_ves_Ymax"); |
| 555 |
double Boite3D_ves_Zmax = param->get_valeur((char*)"Boite3D_ves_Zmax"); |
| 556 |
BOITE_3D Boite3D_ves(Boite3D_ves_Xmin,Boite3D_ves_Ymin,Boite3D_ves_Zmin,Boite3D_ves_Xmax,Boite3D_ves_Ymax,Boite3D_ves_Zmax); |
| 557 |
DCR->change_boite3d_ves(Boite3D_ves); |
| 558 |
} |
| 559 |
double Nb_pas_X = param->get_valeur((char*)"Nb_pas_X"); |
| 560 |
double Nb_pas_Y = param->get_valeur((char*)"Nb_pas_Y"); |
| 561 |
double Nb_pas_Z = param->get_valeur((char*)"Nb_pas_Z"); |
| 562 |
DCR->change_nb_pas_grille(Nb_pas_X); |
| 563 |
double Distance_min_inter_volume = param->get_valeur((char*)"Distance_min_inter_volume"); |
| 564 |
DCR->change_distance_inter_volume_min(Distance_min_inter_volume); |
| 565 |
double Volume_min = param->get_valeur((char*)"Volume_min"); |
| 566 |
DCR->change_volume_min(Volume_min); |
| 567 |
double Aire_min = param->get_valeur((char*)"Aire_min"); |
| 568 |
DCR->change_aire_min(Aire_min); |
| 569 |
double Longueur_min = param->get_valeur((char*)"Longueur_min"); |
| 570 |
DCR->change_longueur_min(Longueur_min); |
| 571 |
double Angle_min = param->get_valeur((char*)"Angle_min"); |
| 572 |
DCR->change_angle_min(Angle_min); |
| 573 |
long Nb_iteration_max = (long)param->get_valeur((char*)"Nb_iteration_max"); |
| 574 |
bool Avec_intersections = (bool)param->get_valeur((char*)"Avec_intersections"); |
| 575 |
DCR->change_intersection_bords_ves(Avec_intersections); |
| 576 |
std::string Nom_groupe_inclusion = param->get_nom((char*)"Nom_groupe_inclusion"); |
| 577 |
char message[1000]; |
| 578 |
sprintf(message,"Generateur DCR : %s",Nom_groupe_inclusion.c_str()); |
| 579 |
affiche(message); |
| 580 |
int Type_inclusion = param->get_valeur((char*)"Type_inclusion"); |
| 581 |
double Fraction_volumique_cible = param->get_valeur((char*)"Fraction_volumique_cible"); |
| 582 |
double Eps_fraction_volumique = param->get_valeur((char*)"Eps_fraction_volumique"); |
| 583 |
bool Porosite = (bool)param->get_valeur((char*)"Porosite"); |
| 584 |
std::string multicouche = param->get_nom((char*)"Multicouche"); |
| 585 |
|
| 586 |
bool Avec_interface_graphique = (bool)param->get_valeur((char*)"Avec_interface_graphique"); |
| 587 |
double Facteur_reduction_vitesse = param->get_valeur((char*)"Facteur_reduction_vitesse"); |
| 588 |
double Friction = param->get_valeur((char*)"Friction"); |
| 589 |
double Pas_temps_sim = param->get_valeur((char*)"Pas_temps_sim"); |
| 590 |
double Temps_max_sim = param->get_valeur((char*)"Temps_max_sim"); |
| 591 |
double Eps_vitesse = param->get_valeur((char*)"Eps_vitesse"); |
| 592 |
DCR->active_interface_graphique(Avec_interface_graphique); |
| 593 |
DCR->change_facteur_reduction_vitesse(Facteur_reduction_vitesse); |
| 594 |
DCR->change_eps_vitesse(Eps_vitesse); |
| 595 |
DCR->change_friction(Friction); |
| 596 |
DCR->change_pas_temps(Pas_temps_sim); |
| 597 |
DCR->change_temps_max_sim(Temps_max_sim); |
| 598 |
|
| 599 |
if(Type_inclusion==MSTRUCT::TYPE_INCLUSION::SPHERE) |
| 600 |
{ |
| 601 |
double Mu_rayon = param->get_valeur((char*)"Mu_rayon"); |
| 602 |
double Sigma_rayon = param->get_valeur((char*)"Sigma_rayon"); |
| 603 |
double Type_distribution_rayon = param->get_valeur((char*)"Type_distribution_rayon"); |
| 604 |
DCR->ajouter_spheres(Nom_groupe_inclusion,Mu_rayon,Sigma_rayon,Type_distribution_rayon,Fraction_volumique_cible,Eps_fraction_volumique,Porosite); |
| 605 |
} |
| 606 |
else if(Type_inclusion==MSTRUCT::TYPE_INCLUSION::CYLINDRE) |
| 607 |
{ |
| 608 |
double Mu_rayon = param->get_valeur((char*)"Mu_rayon"); |
| 609 |
double Sigma_rayon = param->get_valeur((char*)"Sigma_rayon"); |
| 610 |
double Type_distribution_rayon = param->get_valeur((char*)"Type_distribution_rayon"); |
| 611 |
double Mu_longueur = param->get_valeur((char*)"Mu_longueur"); |
| 612 |
double Sigma_longueur = param->get_valeur((char*)"Sigma_longueur"); |
| 613 |
double Type_distribution_longueur = param->get_valeur((char*)"Type_distribution_longueur"); |
| 614 |
double Mu_theta = param->get_valeur((char*)"Mu_theta"); |
| 615 |
double Sigma_theta = param->get_valeur((char*)"Sigma_theta"); |
| 616 |
double Type_distribution_theta = param->get_valeur((char*)"Type_distribution_theta"); |
| 617 |
double Mu_phi = param->get_valeur((char*)"Mu_phi"); |
| 618 |
double Sigma_phi = param->get_valeur((char*)"Sigma_phi"); |
| 619 |
double Type_distribution_phi = param->get_valeur((char*)"Type_distribution_phi"); |
| 620 |
DCR->ajouter_cylindres(Nom_groupe_inclusion, |
| 621 |
Mu_rayon,Sigma_rayon,Type_distribution_rayon, |
| 622 |
Mu_longueur,Sigma_longueur,Type_distribution_longueur, |
| 623 |
Mu_theta,Sigma_theta,Type_distribution_theta, |
| 624 |
Mu_phi,Sigma_phi,Type_distribution_phi, |
| 625 |
Fraction_volumique_cible,Eps_fraction_volumique, |
| 626 |
Porosite); |
| 627 |
} |
| 628 |
#else |
| 629 |
std::cerr << "*** ERREUR : MSTRUCT_VES::generer_geometrie : PROJECT_CHRONO absent ***" << std::endl; |
| 630 |
#endif |
| 631 |
} |
| 632 |
} |
| 633 |
if(generateur->get_type()==MSTRUCT::TYPE_GENERATEUR::DCR) |
| 634 |
{ |
| 635 |
#ifdef PROJECT_CHRONO |
| 636 |
MSTRUCT_GENERATEUR_DCR *DCR= (MSTRUCT_GENERATEUR_DCR*)generateur; |
| 637 |
if(DCR->lancer_simulation()==FAIL) |
| 638 |
{ |
| 639 |
delete generateur; |
| 640 |
return FAIL; |
| 641 |
} |
| 642 |
for(it=vector_params_geometrie.begin();it!=vector_params_geometrie.end();it++) |
| 643 |
{ |
| 644 |
OT_PARAMETRES* param = *it; |
| 645 |
int changement = param->get_valeur((char*)"Changement_geometrie"); |
| 646 |
if(changement==0) |
| 647 |
DCR->generer_geometrie(); |
| 648 |
if(changement==1) |
| 649 |
DCR->generer_geometrie_avec_changement(); |
| 650 |
|
| 651 |
#else |
| 652 |
std::cerr << "*** ERREUR : MSTRUCT_VES::generer_geometrie : PROJECT_CHRONO absent ***" << std::endl; |
| 653 |
#endif |
| 654 |
} |
| 655 |
} |
| 656 |
ot_cpu.ajouter_etape((char*)"generation_geometrie"); |
| 657 |
double temps_generation_geometrie; |
| 658 |
ot_cpu.get_etape((char*)"generation_geometrie",temps_generation_geometrie); |
| 659 |
change_temps_geometrie(get_temps_geometrie()+temps_generation_geometrie); |
| 660 |
generateur->construire(this); |
| 661 |
delete generateur; |
| 662 |
return OK; |
| 663 |
} |
| 664 |
|
| 665 |
int MSTRUCT_VES::generer_materiau(std::vector< OT_PARAMETRES* >& vector_params_materiau) |
| 666 |
{ |
| 667 |
OT_CPU ot_cpu; |
| 668 |
ot_cpu.initialise(); |
| 669 |
std::vector<OT_PARAMETRES*>::iterator it; |
| 670 |
for(it=vector_params_materiau.begin();it!=vector_params_materiau.end();it++) |
| 671 |
{ |
| 672 |
OT_PARAMETRES* param = *it; |
| 673 |
std::string Nom_groupe_forme = param->get_nom((char*)"Nom_groupe_forme"); |
| 674 |
bool Etude_mecanique = (bool)param->get_valeur((char*)"Etude_mecanique"); |
| 675 |
if(Etude_mecanique) |
| 676 |
{ |
| 677 |
double Mu_E = param->get_valeur((char*)"Mu_E"); |
| 678 |
double Sigma_E = param->get_valeur((char*)"Sigma_E"); |
| 679 |
int Type_distribution_E = (int)param->get_valeur((char*)"Type_distribution_E"); |
| 680 |
double Mu_nu = param->get_valeur((char*)"Mu_nu"); |
| 681 |
double Sigma_nu = param->get_valeur((char*)"Sigma_nu"); |
| 682 |
int Type_distribution_nu = (int)param->get_valeur((char*)"Type_distribution_nu"); |
| 683 |
std::random_device seed; |
| 684 |
std::mt19937_64 generateur(seed()); |
| 685 |
std::uniform_real_distribution<double> uniform_distribution_E(Mu_E-Sigma_E,Mu_E+Sigma_E); |
| 686 |
std::normal_distribution<double> normal_distribution_E(Mu_E,Sigma_E); |
| 687 |
std::uniform_real_distribution<double> uniform_distribution_nu(Mu_nu-Sigma_nu,Mu_nu+Sigma_nu); |
| 688 |
std::normal_distribution<double> normal_distribution_nu(Mu_nu,Sigma_nu); |
| 689 |
MG_CG_GROUPE_FORME* mgcg_groupe_forme = m_mgcg_modele->get_mgcg_groupe_forme(Nom_groupe_forme); |
| 690 |
std::map<long,MG_CG_FORME*>::iterator it_forme; |
| 691 |
for(MG_CG_FORME* forme = mgcg_groupe_forme->get_premiere_mgcg_forme(it_forme);forme!=NULL;forme=mgcg_groupe_forme->get_suivante_mgcg_forme(it_forme)) |
| 692 |
{ |
| 693 |
double E; |
| 694 |
if(Type_distribution_E==MSTRUCT::TYPE_DISTRIBUTION::FIXE) E=Mu_E; |
| 695 |
else if(Type_distribution_E==MSTRUCT::TYPE_DISTRIBUTION::UNIFORME) E=uniform_distribution_E(generateur); |
| 696 |
else if(Type_distribution_E==MSTRUCT::TYPE_DISTRIBUTION::NORMALE) E=normal_distribution_E(generateur); |
| 697 |
double nu; |
| 698 |
if(Type_distribution_nu==MSTRUCT::TYPE_DISTRIBUTION::FIXE) nu=Mu_nu; |
| 699 |
else if(Type_distribution_nu==MSTRUCT::TYPE_DISTRIBUTION::UNIFORME) nu=uniform_distribution_nu(generateur); |
| 700 |
else if(Type_distribution_nu==MSTRUCT::TYPE_DISTRIBUTION::NORMALE) nu=normal_distribution_nu(generateur); |
| 701 |
if(forme->get_type_forme()==MG_CG_FORME::TYPE_FORME::VOLUME) |
| 702 |
{ |
| 703 |
MG_CG_FORME_VOLUME* forme_volume = (MG_CG_FORME_VOLUME*)forme; |
| 704 |
forme_volume->get_mg_volume()->ajouter_ccf((char*)"Em",E); |
| 705 |
forme_volume->get_mg_volume()->ajouter_ccf((char*)"nu",nu); |
| 706 |
} |
| 707 |
if(forme->get_type_forme()==MG_CG_FORME::TYPE_FORME::MULTI_VOLUME) |
| 708 |
{ |
| 709 |
MG_CG_FORME_MULTI_VOLUME* forme_multi_volume = (MG_CG_FORME_MULTI_VOLUME*)forme; |
| 710 |
std::map<long,MG_VOLUME*>::iterator it_volume; |
| 711 |
for(MG_VOLUME* volume = forme_multi_volume->get_premier_mg_volume(it_volume);volume!=NULL;volume=forme_multi_volume->get_suivant_mg_volume(it_volume)) |
| 712 |
{ |
| 713 |
volume->ajouter_ccf((char*)"Em",E); |
| 714 |
volume->ajouter_ccf((char*)"nu",nu); |
| 715 |
} |
| 716 |
} |
| 717 |
} |
| 718 |
} |
| 719 |
bool Etude_thermique = (bool)param->get_valeur((char*)"Etude_thermique"); |
| 720 |
if(Etude_thermique) |
| 721 |
{ |
| 722 |
double Mu_Lambda = param->get_valeur((char*)"Mu_Lambda"); |
| 723 |
double Sigma_Lambda = param->get_valeur((char*)"Sigma_Lambda"); |
| 724 |
int Type_distribution_Lambda = (int)param->get_valeur((char*)"Type_distribution_Lambda"); |
| 725 |
double Mu_Ro = param->get_valeur((char*)"Mu_Ro"); |
| 726 |
double Sigma_Ro = param->get_valeur((char*)"Sigma_Ro"); |
| 727 |
int Type_distribution_Ro = (int)param->get_valeur((char*)"Type_distribution_Ro"); |
| 728 |
double Mu_Cp = param->get_valeur((char*)"Mu_Cp"); |
| 729 |
double Sigma_Cp = param->get_valeur((char*)"Sigma_Cp"); |
| 730 |
int Type_distribution_Cp = (int)param->get_valeur((char*)"Type_distribution_Cp"); |
| 731 |
std::random_device seed; |
| 732 |
std::mt19937_64 generateur(seed()); |
| 733 |
std::uniform_real_distribution<double> uniform_distribution_Lambda(Mu_Lambda-Sigma_Lambda,Mu_Lambda+Sigma_Lambda); |
| 734 |
std::normal_distribution<double> normal_distribution_Lambda(Mu_Lambda,Sigma_Lambda); |
| 735 |
std::uniform_real_distribution<double> uniform_distribution_Ro(Mu_Ro-Sigma_Ro,Mu_Ro+Sigma_Ro); |
| 736 |
std::normal_distribution<double> normal_distribution_Ro(Mu_Ro,Sigma_Ro); |
| 737 |
std::uniform_real_distribution<double> uniform_distribution_Cp(Mu_Cp-Sigma_Cp,Mu_Cp+Sigma_Cp); |
| 738 |
std::normal_distribution<double> normal_distribution_Cp(Mu_Cp,Sigma_Cp); |
| 739 |
MG_CG_GROUPE_FORME* mgcg_groupe_forme = m_mgcg_modele->get_mgcg_groupe_forme(Nom_groupe_forme); |
| 740 |
std::map<long,MG_CG_FORME*>::iterator it_forme; |
| 741 |
for(MG_CG_FORME* forme = mgcg_groupe_forme->get_premiere_mgcg_forme(it_forme);forme!=NULL;forme=mgcg_groupe_forme->get_suivante_mgcg_forme(it_forme)) |
| 742 |
{ |
| 743 |
double Lambda; |
| 744 |
if(Type_distribution_Lambda==MSTRUCT::TYPE_DISTRIBUTION::FIXE) Lambda=Mu_Lambda; |
| 745 |
else if(Type_distribution_Lambda==MSTRUCT::TYPE_DISTRIBUTION::UNIFORME) Lambda=uniform_distribution_Lambda(generateur); |
| 746 |
else if(Type_distribution_Lambda==MSTRUCT::TYPE_DISTRIBUTION::NORMALE) Lambda=normal_distribution_Lambda(generateur); |
| 747 |
double Ro; |
| 748 |
if(Type_distribution_Ro==MSTRUCT::TYPE_DISTRIBUTION::FIXE) Ro=Mu_Ro; |
| 749 |
else if(Type_distribution_Ro==MSTRUCT::TYPE_DISTRIBUTION::UNIFORME) Ro=uniform_distribution_Ro(generateur); |
| 750 |
else if(Type_distribution_Ro==MSTRUCT::TYPE_DISTRIBUTION::NORMALE) Ro=normal_distribution_Ro(generateur); |
| 751 |
double Cp; |
| 752 |
if(Type_distribution_Cp==MSTRUCT::TYPE_DISTRIBUTION::FIXE) Cp=Mu_Cp; |
| 753 |
else if(Type_distribution_Cp==MSTRUCT::TYPE_DISTRIBUTION::UNIFORME) Cp=uniform_distribution_Cp(generateur); |
| 754 |
else if(Type_distribution_Cp==MSTRUCT::TYPE_DISTRIBUTION::NORMALE) Cp=normal_distribution_Cp(generateur); |
| 755 |
if(forme->get_type_forme()==MG_CG_FORME::TYPE_FORME::VOLUME) |
| 756 |
{ |
| 757 |
MG_CG_FORME_VOLUME* forme_volume = (MG_CG_FORME_VOLUME*)forme; |
| 758 |
forme_volume->get_mg_volume()->ajouter_ccf((char*)"Kx",Lambda); |
| 759 |
forme_volume->get_mg_volume()->ajouter_ccf((char*)"Ro",Ro); |
| 760 |
forme_volume->get_mg_volume()->ajouter_ccf((char*)"Cp",Cp); |
| 761 |
} |
| 762 |
if(forme->get_type_forme()==MG_CG_FORME::TYPE_FORME::MULTI_VOLUME) |
| 763 |
{ |
| 764 |
MG_CG_FORME_MULTI_VOLUME* forme_multi_volume = (MG_CG_FORME_MULTI_VOLUME*)forme; |
| 765 |
std::map<long,MG_VOLUME*>::iterator it_volume; |
| 766 |
for(MG_VOLUME* volume = forme_multi_volume->get_premier_mg_volume(it_volume);volume!=NULL;volume=forme_multi_volume->get_suivant_mg_volume(it_volume)) |
| 767 |
{ |
| 768 |
volume->ajouter_ccf((char*)"Kx",Lambda); |
| 769 |
volume->ajouter_ccf((char*)"Ro",Ro); |
| 770 |
volume->ajouter_ccf((char*)"Cp",Cp); |
| 771 |
} |
| 772 |
} |
| 773 |
} |
| 774 |
} |
| 775 |
} |
| 776 |
ot_cpu.ajouter_etape((char*)"generation_materiau"); |
| 777 |
double temps_generation_materiau; |
| 778 |
ot_cpu.get_etape((char*)"generation_materiau",temps_generation_materiau); |
| 779 |
change_temps_materiau(get_temps_materiau()+temps_generation_materiau); |
| 780 |
return OK; |
| 781 |
} |
| 782 |
|
| 783 |
int MSTRUCT_VES::generer_carte(OT_PARAMETRES *param) |
| 784 |
{ |
| 785 |
double Ecart_nodal = param->get_valeur((char*)"Ecart_nodal"); |
| 786 |
double Ecart_eps_face_particule = param->get_valeur((char*)"Ecart_eps_face_particule"); |
| 787 |
double Fechantillonnage = param->get_valeur((char*)"Fechantillonnage"); |
| 788 |
double Nb_cellule_direction = param->get_valeur((char*)"Nb_cellule_direction"); |
| 789 |
std::string Nom_fem_solution = param->get_nom((char*)"Nom_fem_solution"); |
| 790 |
std::string Nom_mg_gestionnaire_carte = param->get_nom((char*)"Nom_mg_gestionnaire_carte"); |
| 791 |
std::string Nom_carte = param->get_nom((char*)"Nom_carte"); |
| 792 |
double Nb_couche_min = param->get_valeur((char*)"Nb_couche_min"); |
| 793 |
double Nb_pas = param->get_valeur((char*)"Nb_pas"); |
| 794 |
double Facteur_augmentation = param->get_valeur((char*)"Facteur_augmentation"); |
| 795 |
MG_GESTIONNAIRE *mggest_carte = new MG_GESTIONNAIRE; |
| 796 |
MG_CG_GROUPE_FORME* mgcg_groupe_matrice = m_mgcg_modele->get_mgcg_groupe_forme((char*)"Matrice"); |
| 797 |
TPL_MAP_ENTITE<MG_VOLUME*> tpl_map_volume_matrice = mgcg_groupe_matrice->get_tpl_map_volume(); |
| 798 |
OT_CPU ot_cpu; |
| 799 |
ot_cpu.initialise(); |
| 800 |
FCT_TAILLE_FEM_SOLUTION_GENERATEUR_MICROSTRUCTURE *carte = new FCT_TAILLE_FEM_SOLUTION_GENERATEUR_MICROSTRUCTURE(mggest_carte, |
| 801 |
m_mg_geometrie, |
| 802 |
Ecart_nodal, |
| 803 |
Ecart_eps_face_particule, |
| 804 |
Fechantillonnage, |
| 805 |
Nb_cellule_direction, |
| 806 |
(char*)Nom_fem_solution.c_str(), |
| 807 |
tpl_map_volume_matrice, |
| 808 |
Nb_couche_min, |
| 809 |
Nb_pas, |
| 810 |
Facteur_augmentation); |
| 811 |
|
| 812 |
|
| 813 |
carte->active_affichage(fonc_affiche); |
| 814 |
carte->construit(); |
| 815 |
ot_cpu.ajouter_etape((char*)"generation_carte"); |
| 816 |
double temps_generation_carte; |
| 817 |
ot_cpu.get_etape((char*)"generation_carte",temps_generation_carte); |
| 818 |
change_temps_carte(get_temps_carte()+temps_generation_carte); |
| 819 |
mggest_carte->enregistrer(Nom_mg_gestionnaire_carte.c_str()); |
| 820 |
carte->enregistrer((char*)Nom_carte.c_str()); |
| 821 |
char message[1000]; |
| 822 |
std::sprintf(message,"Fichier CARTE de sortie : %s",Nom_carte.c_str()); |
| 823 |
affiche(message); |
| 824 |
m_ves_file->change_nom_fichier_carte((char*)Nom_carte.c_str()); |
| 825 |
return OK; |
| 826 |
} |
| 827 |
|
| 828 |
int MSTRUCT_VES::generer_maillage(OT_PARAMETRES *param,FCT_TAILLE_FEM_SOLUTION* carte) |
| 829 |
{ |
| 830 |
OT_CPU ot_cpu; |
| 831 |
ot_cpu.initialise(); |
| 832 |
int Niveau = (int)param->get_valeur((char*)"Niveau"); |
| 833 |
int Niveau_opt_2d = (int)param->get_valeur((char*)"Niveau_opt_2d"); |
| 834 |
int Niveau_opt_3d = (int)param->get_valeur((char*)"Niveau_opt_3d"); |
| 835 |
double Priorite_metrique = param->get_valeur((char*)"Priorite_metrique"); |
| 836 |
int Analyse = (int)param->get_valeur((char*)"Analyse"); |
| 837 |
int Grille_reguliere = (int)param->get_valeur((char*)"Grille_reguliere"); |
| 838 |
int Gr_nx = param->get_valeur((char*)"Gr_nx"); |
| 839 |
int Gr_ny = param->get_valeur((char*)"Gr_ny"); |
| 840 |
int Gr_nz = param->get_valeur((char*)"Gr_nz"); |
| 841 |
affiche((char*)"Maillage du VER :"); |
| 842 |
if(!Grille_reguliere) |
| 843 |
{ |
| 844 |
m_mg_maillage = new MG_MAILLAGE(m_mg_geometrie); |
| 845 |
m_mg_gestionnaire->ajouter_mg_maillage(m_mg_maillage); |
| 846 |
change_mg_maillage(m_mg_maillage); |
| 847 |
affiche((char*)"Maillage 3D_couche :"); |
| 848 |
MAILLEUR3D_COUCHE m3d_couche(m_mg_maillage,m_mg_geometrie,carte); |
| 849 |
m3d_couche.active_affichage(fonc_affiche); |
| 850 |
LISTE_MG_VOLUME::iterator it_volume; |
| 851 |
for(MG_VOLUME* volume=m_mg_geometrie->get_premier_volume(it_volume);volume!=NULL;volume=m_mg_geometrie->get_suivant_volume(it_volume)) |
| 852 |
{ |
| 853 |
if(volume->est_mince()) |
| 854 |
{ |
| 855 |
char message[1000]; |
| 856 |
sprintf(message,"-> Maillage du volume id %li",volume->get_id()); |
| 857 |
affiche(message); |
| 858 |
if(m3d_couche.maille(volume)==FAIL) return FAIL; |
| 859 |
} |
| 860 |
} |
| 861 |
if(Niveau>=0) |
| 862 |
{ |
| 863 |
long i=1; |
| 864 |
long nb=m_mg_geometrie->get_nb_mg_sommet(); |
| 865 |
MAILLEUR0D m0d(m_mg_maillage,m_mg_geometrie); |
| 866 |
affiche((char*)"Maillage 0D :"); |
| 867 |
LISTE_MG_SOMMET::iterator it_sommet; |
| 868 |
for(MG_SOMMET* sommet=m_mg_geometrie->get_premier_sommet(it_sommet);sommet!=NULL;sommet=m_mg_geometrie->get_suivant_sommet(it_sommet)) |
| 869 |
{ |
| 870 |
if(sommet->get_lien_maillage()->get_nb()>0) continue; |
| 871 |
char message[1000]; |
| 872 |
sprintf(message,"[%4li/%li] Maillage du sommet id %li",i,nb,sommet->get_id()); |
| 873 |
affiche(message); |
| 874 |
if(m0d.maille(sommet)==FAIL) return FAIL; |
| 875 |
i++; |
| 876 |
} |
| 877 |
} |
| 878 |
if(Niveau>=1) |
| 879 |
{ |
| 880 |
long i=1; |
| 881 |
long nb=m_mg_geometrie->get_nb_mg_arete(); |
| 882 |
MAILLEUR1D m1d(m_mg_maillage,m_mg_geometrie,carte); |
| 883 |
affiche((char*)"Maillage 1D :"); |
| 884 |
m1d.active_affichage(fonc_affiche); |
| 885 |
LISTE_MG_ARETE::iterator it_arete; |
| 886 |
for(MG_ARETE* arete=m_mg_geometrie->get_premier_arete(it_arete);arete!=NULL;arete=m_mg_geometrie->get_suivant_arete(it_arete)) |
| 887 |
{ |
| 888 |
if(arete->get_lien_maillage()->get_nb()>0) continue; |
| 889 |
char message[1000]; |
| 890 |
sprintf(message,"[%4li/%li] Maillage de l'arete id %li",i,nb,arete->get_id()); |
| 891 |
affiche(message); |
| 892 |
if(m1d.maille(arete)==FAIL) return FAIL; |
| 893 |
i++; |
| 894 |
} |
| 895 |
} |
| 896 |
if(Niveau>=2) |
| 897 |
{ |
| 898 |
long i=1; |
| 899 |
long nb=m_mg_geometrie->get_nb_mg_face(); |
| 900 |
MAILLEUR2D m2d(m_mg_maillage,m_mg_geometrie,carte); |
| 901 |
m2d.change_niveau_optimisation(Niveau_opt_2d); |
| 902 |
m2d.change_priorite_metrique(Priorite_metrique); |
| 903 |
affiche((char*)"Maillage 2D :"); |
| 904 |
m2d.active_affichage(fonc_affiche); |
| 905 |
LISTE_MG_FACE::iterator it_face; |
| 906 |
for(MG_FACE* face=m_mg_geometrie->get_premier_face(it_face);face!=NULL;face=m_mg_geometrie->get_suivant_face(it_face)) |
| 907 |
{ |
| 908 |
if(face->get_lien_maillage()->get_nb()>0) continue; |
| 909 |
char message[1000]; |
| 910 |
sprintf(message,"[%4li/%li] Maillage de la face id %li",i,nb,face->get_id()); |
| 911 |
affiche(message); |
| 912 |
if(m2d.maille(face)==FAIL) return FAIL; |
| 913 |
i++; |
| 914 |
} |
| 915 |
} |
| 916 |
if(Niveau>=3) |
| 917 |
{ |
| 918 |
long i=1; |
| 919 |
long nb=m_mg_geometrie->get_nb_mg_volume(); |
| 920 |
MAILLEUR3D m3d(m_mg_maillage,m_mg_geometrie,carte,false); |
| 921 |
m3d.change_niveau_optimisation(Niveau_opt_3d); |
| 922 |
m3d.change_priorite_metrique(Priorite_metrique); |
| 923 |
affiche((char*)"Maillage 3D :"); |
| 924 |
m3d.active_affichage(fonc_affiche); |
| 925 |
for(MG_VOLUME* volume=m_mg_geometrie->get_premier_volume(it_volume);volume!=NULL;volume=m_mg_geometrie->get_suivant_volume(it_volume)) |
| 926 |
{ |
| 927 |
if(volume->get_lien_maillage()->get_nb()>0) continue; |
| 928 |
if(volume->est_mince()) continue; |
| 929 |
char message[1000]; |
| 930 |
sprintf(message,"[%4li/%li] Maillage du volume id %li",i,nb,volume->get_id()); |
| 931 |
affiche(message); |
| 932 |
if(m3d.maille(volume)==FAIL) return FAIL; |
| 933 |
i++; |
| 934 |
} |
| 935 |
} |
| 936 |
} |
| 937 |
else |
| 938 |
{ |
| 939 |
maill_struct(0.0,1.0,0.0,1.0,0.0,1.0,Gr_nx,Gr_ny,Gr_nz); |
| 940 |
m_mg_maillage=m_mg_gestionnaire->get_mg_maillage(m_mg_gestionnaire->get_nb_mg_maillage()-1); |
| 941 |
change_mg_maillage(m_mg_maillage); |
| 942 |
LISTE_MG_HEXA::iterator it_hexa; |
| 943 |
TPL_GRILLE<MG_HEXA*> tpl_grille_hexa; |
| 944 |
tpl_grille_hexa.initialiser(-0.1,-0.1,-0.1,1.1,1.1,1.1,20,20,20); |
| 945 |
for(MG_HEXA* hexa=m_mg_maillage->get_premier_hexa(it_hexa);hexa!=NULL;hexa=m_mg_maillage->get_suivant_hexa(it_hexa)) |
| 946 |
{ |
| 947 |
tpl_grille_hexa.inserer(hexa); |
| 948 |
hexa->change_nouveau_numero(-1); |
| 949 |
} |
| 950 |
long i_volume=0; |
| 951 |
long nb_volume=m_mg_geometrie->get_nb_mg_volume(); |
| 952 |
LISTE_MG_VOLUME::iterator it_volume; |
| 953 |
for(MG_VOLUME*vol=m_mg_geometrie->get_premier_volume(it_volume);vol!=NULL;vol=m_mg_geometrie->get_suivant_volume(it_volume)) |
| 954 |
{ |
| 955 |
TPL_MAP_ENTITE<MG_HEXA*> hexa_trouve; |
| 956 |
tpl_grille_hexa.rechercher(vol->get_boite_3D(),hexa_trouve); |
| 957 |
for(MG_HEXA* hexa=hexa_trouve.get_premier(it_hexa);hexa!=NULL;hexa=hexa_trouve.get_suivant(it_hexa)) |
| 958 |
{ |
| 959 |
if(hexa->get_nouveau_numero()<0) |
| 960 |
{ |
| 961 |
BOITE_3D boite3d=hexa->get_boite_3D(); |
| 962 |
double xyz[3]; |
| 963 |
boite3d.get_centre(xyz); |
| 964 |
if(OT_GEOMETRIE::est_dans_mg_volume(xyz,vol)==1) |
| 965 |
{ |
| 966 |
hexa->change_lien_topologie2(vol); |
| 967 |
vol->get_lien_maillage()->ajouter(hexa); |
| 968 |
hexa->change_nouveau_numero(vol->get_id()); |
| 969 |
} |
| 970 |
} |
| 971 |
} |
| 972 |
i_volume++; |
| 973 |
std::cout << i_volume << "/" << nb_volume << std::endl; |
| 974 |
} |
| 975 |
|
| 976 |
|
| 977 |
|
| 978 |
|
| 979 |
|
| 980 |
|
| 981 |
|
| 982 |
} |
| 983 |
ot_cpu.ajouter_etape((char*)"generation_maillage"); |
| 984 |
double temps_generation_maillage; |
| 985 |
ot_cpu.get_etape((char*)"generation_maillage",temps_generation_maillage); |
| 986 |
change_temps_maillage(get_temps_maillage()+temps_generation_maillage); |
| 987 |
return OK; |
| 988 |
} |
| 989 |
|
| 990 |
int MSTRUCT_VES::maill_struct(double xmin, double xmax, double ymin, double ymax, double zmin, double zmax, int n, int m, int k) |
| 991 |
{ |
| 992 |
|
| 993 |
affiche((char*)"Création d'un maillage MG structuré"); |
| 994 |
double intx, inty, intz; |
| 995 |
std::vector<double> tabx,taby,tabz; |
| 996 |
|
| 997 |
intx=fabs(xmax-xmin)/n; |
| 998 |
inty=fabs(ymax-ymin)/m; |
| 999 |
intz=fabs(zmax-zmin)/k; |
| 1000 |
|
| 1001 |
|
| 1002 |
|
| 1003 |
MG_GEOMETRIE* geo= m_mg_geometrie; |
| 1004 |
|
| 1005 |
MG_MAILLAGE* mai=new MG_MAILLAGE(geo); |
| 1006 |
m_mg_gestionnaire->ajouter_mg_maillage(mai); |
| 1007 |
std::vector<MG_NOEUD*> vecnod; |
| 1008 |
for (int l=0; l<=k ;l++) |
| 1009 |
{ |
| 1010 |
for (int j=0; j<=m;j++) |
| 1011 |
{ |
| 1012 |
for (int i=0; i<=n;i++) |
| 1013 |
{ |
| 1014 |
MG_ELEMENT_TOPOLOGIQUE *topo=NULL; |
| 1015 |
|
| 1016 |
double x,y,z; |
| 1017 |
|
| 1018 |
z=zmin+(l*intz); |
| 1019 |
y=ymin+(j*inty); |
| 1020 |
x=xmin+(i*intx); |
| 1021 |
|
| 1022 |
|
| 1023 |
MG_NOEUD* nou=mai->ajouter_mg_noeud(topo,x,y,z,MAGIC::ORIGINE::MAILLEUR_AUTO); |
| 1024 |
vecnod.push_back(nou); |
| 1025 |
} |
| 1026 |
} |
| 1027 |
} |
| 1028 |
for(int l=0; l<k;l++) |
| 1029 |
{ |
| 1030 |
for(int j=0; j<m;j++) |
| 1031 |
{ |
| 1032 |
for(int i=0; i<n;i++) |
| 1033 |
{ |
| 1034 |
MG_NOEUD* nod1=vecnod[i+((n+1)*j)+(l*(m+1)*(n+1))]; |
| 1035 |
MG_NOEUD* nod2=vecnod[(i+1)+((n+1)*j)+(l*(m+1)*(n+1))]; |
| 1036 |
MG_NOEUD* nod3=vecnod[(i+1)+(n+1)*(j+1)+(l*(m+1)*(n+1))]; |
| 1037 |
MG_NOEUD* nod4=vecnod[i+(n+1)*(j+1)+(l*(m+1)*(n+1))]; |
| 1038 |
MG_NOEUD* nod5=vecnod[i+((n+1)*j)+((l+1)*(m+1)*(n+1))]; |
| 1039 |
MG_NOEUD* nod6=vecnod[(i+1)+((n+1)*j)+((l+1)*(m+1)*(n+1))]; |
| 1040 |
MG_NOEUD* nod7=vecnod[(i+1)+(n+1)*(j+1)+((l+1)*(m+1)*(n+1))]; |
| 1041 |
MG_NOEUD* nod8=vecnod[i+(n+1)*(j+1)+((l+1)*(m+1)*(n+1))]; |
| 1042 |
MG_HEXA *hexa=mai->ajouter_mg_hexa(NULL,nod1,nod2,nod3,nod4,nod5,nod6,nod7,nod8,MAGIC::ORIGINE::MAILLEUR_AUTO); |
| 1043 |
} |
| 1044 |
} |
| 1045 |
} |
| 1046 |
/*affiche((char*)"Création d'un maillage FEM structuré"); |
| 1047 |
FEM_MAILLAGE* fem = new FEM_MAILLAGE(geo, mai,1); |
| 1048 |
gest->ajouter_fem_maillage(fem); |
| 1049 |
fem->construire();*/ |
| 1050 |
return OK; |
| 1051 |
} |
| 1052 |
|
| 1053 |
|
| 1054 |
int MSTRUCT_VES::generer_fem_maillage(OT_PARAMETRES *param) |
| 1055 |
{ |
| 1056 |
OT_CPU ot_cpu; |
| 1057 |
ot_cpu.initialise(); |
| 1058 |
int Degre = (int)param->get_valeur((char*)"Degre"); |
| 1059 |
int Analyse = (int)param->get_valeur((char*)"Analyse"); |
| 1060 |
int Optimisation_num_noeud = (int)param->get_valeur((char*)"Optimisation_num_noeud"); |
| 1061 |
int decoup=(int)param->get_valeur((char*)"Avec_decoup"); |
| 1062 |
bool courbure_discrete; |
| 1063 |
if(decoup==0) courbure_discrete=false; |
| 1064 |
if(decoup==1) courbure_discrete=true; |
| 1065 |
MAILLEUR_FEM mailleurfem; |
| 1066 |
mailleurfem.active_affichage(fonc_affiche); |
| 1067 |
m_fem_maillage = new FEM_MAILLAGE(m_mg_maillage->get_mg_geometrie(),m_mg_maillage,Degre); |
| 1068 |
m_mg_gestionnaire->ajouter_fem_maillage(m_fem_maillage); |
| 1069 |
change_fem_maillage(m_fem_maillage); |
| 1070 |
if(Optimisation_num_noeud) {if(mailleurfem.maille(m_fem_maillage,courbure_discrete,1)==FAIL) return FAIL;} |
| 1071 |
else {if(mailleurfem.maille(m_fem_maillage,courbure_discrete,0)==FAIL) return FAIL;}; |
| 1072 |
if(Analyse) |
| 1073 |
{ |
| 1074 |
MAILLEUR_ANALYSE m3d(m_fem_maillage); |
| 1075 |
m3d.active_affichage(fonc_affiche); |
| 1076 |
} |
| 1077 |
ot_cpu.ajouter_etape((char*)"generation_fem_maillage"); |
| 1078 |
double temps_generation_fem_maillage; |
| 1079 |
ot_cpu.get_etape((char*)"generation_fem_maillage",temps_generation_fem_maillage); |
| 1080 |
change_temps_fem_maillage(get_temps_fem_maillage()+temps_generation_fem_maillage); |
| 1081 |
return OK; |
| 1082 |
} |
| 1083 |
|
| 1084 |
int MSTRUCT_VES::generer_etude(OT_PARAMETRES *param) |
| 1085 |
{ |
| 1086 |
OT_CPU ot_cpu; |
| 1087 |
ot_cpu.initialise(); |
| 1088 |
BOITE_3D boite3D_ves = get_boite3d_ves(); |
| 1089 |
double eps = get_precision(); |
| 1090 |
int Type_etude = (int)param->get_valeur((char*)"Type_etude"); |
| 1091 |
int Type_Chargement = (int)param->get_valeur((char*)"Type_Chargement"); |
| 1092 |
int Type_CL = (int)param->get_valeur((char*)"Type_CL"); |
| 1093 |
double Valeur_CL = param->get_valeur((char*)"Valeur_CL"); |
| 1094 |
int Direction = (int)param->get_valeur((char*)"Direction"); |
| 1095 |
MSTRUCT_OUTILS::appliquer_conditions_limites(m_mg_geometrie,boite3D_ves,Type_etude,Type_CL,Type_Chargement,Valeur_CL,Direction,eps); |
| 1096 |
ot_cpu.ajouter_etape((char*)"generation_etude"); |
| 1097 |
double temps_generation_etude; |
| 1098 |
ot_cpu.get_etape((char*)"generation_etude",temps_generation_etude); |
| 1099 |
change_temps_etude(get_temps_etude()+temps_generation_etude); |
| 1100 |
return OK; |
| 1101 |
} |
| 1102 |
|
| 1103 |
int MSTRUCT_VES::generer_calcul(OT_PARAMETRES *param,char* param_aster,std::string nom_etude) |
| 1104 |
{ |
| 1105 |
int Type_etude = (int)param->get_valeur((char*)"Type_etude"); |
| 1106 |
int Type_calcul; |
| 1107 |
if(Type_etude==MSTRUCT::TYPE_ETUDE::MECANIQUE) Type_calcul=MAGIC::CALCUL_ASTER::ELASTIQUE; |
| 1108 |
else if(Type_etude==MSTRUCT::TYPE_ETUDE::THERMIQUE) Type_calcul=MAGIC::CALCUL_ASTER::THERMIQUE; |
| 1109 |
std::string Code_resu = param->get_nom((char*)"Code_resu"); |
| 1110 |
MGASTER mgaster; |
| 1111 |
mgaster.active_affichage(fonc_affiche); |
| 1112 |
OT_CPU ot_cpu; |
| 1113 |
ot_cpu.initialise(); |
| 1114 |
mgaster.calcule(param_aster,m_fem_maillage,(char*)nom_etude.c_str(),Type_calcul,(char*)Code_resu.c_str()); |
| 1115 |
ot_cpu.ajouter_etape((char*)"calcul"); |
| 1116 |
double temps_calcul; |
| 1117 |
ot_cpu.get_etape((char*)"calcul",temps_calcul); |
| 1118 |
change_temps_calcul(get_temps_calcul()+temps_calcul); |
| 1119 |
return 0; |
| 1120 |
|
| 1121 |
} |
| 1122 |
|
| 1123 |
int MSTRUCT_VES::generer_post_traitement(std::vector<OT_PARAMETRES *>& vector_params_post_traitement) |
| 1124 |
{ |
| 1125 |
OT_CPU ot_cpu; |
| 1126 |
ot_cpu.initialise(); |
| 1127 |
std::vector<OT_PARAMETRES*>::iterator it; |
| 1128 |
char ligne[1000]; |
| 1129 |
for(it=vector_params_post_traitement.begin();it!=vector_params_post_traitement.end();it++) |
| 1130 |
{ |
| 1131 |
OT_PARAMETRES* param = *it; |
| 1132 |
int Type_post_traitement = (int)param->get_valeur((char*)"Type_post_traitement"); |
| 1133 |
std::string Identifiant = param->get_nom((char*)"Identifiant"); |
| 1134 |
if(get_analyse(Identifiant)!=NULL) |
| 1135 |
{ |
| 1136 |
std::cerr << "*** Analyse [" << Identifiant << "] existante ***" << std::endl; |
| 1137 |
continue; |
| 1138 |
} |
| 1139 |
sprintf(ligne,"-> %s",Identifiant.c_str()); |
| 1140 |
affiche(ligne); |
| 1141 |
if(Type_post_traitement==MSTRUCT::TYPE_POST_TRAITEMENT::POST_CHAMP) |
| 1142 |
{ |
| 1143 |
long Num_solution = (long)param->get_valeur((char*)"Num_solution"); |
| 1144 |
std::string Nom_groupe_forme = param->get_nom((char*)"Nom_groupe_forme"); |
| 1145 |
double Largeur_colonne_distribution = (double)param->get_valeur((char*)"Largeur_colonne_distribution"); |
| 1146 |
BOITE_3D *boite_3d_analyse=NULL; |
| 1147 |
int Boite_analyse = (int)param->get_valeur((char*)"Boite_analyse"); |
| 1148 |
if(Boite_analyse) |
| 1149 |
{ |
| 1150 |
double Xmin = (double)param->get_valeur((char*)"Boite3D_analyse_Xmin"); |
| 1151 |
double Ymin = (double)param->get_valeur((char*)"Boite3D_analyse_Ymin"); |
| 1152 |
double Zmin = (double)param->get_valeur((char*)"Boite3D_analyse_Zmin"); |
| 1153 |
double Xmax = (double)param->get_valeur((char*)"Boite3D_analyse_Xmax"); |
| 1154 |
double Ymax = (double)param->get_valeur((char*)"Boite3D_analyse_Ymax"); |
| 1155 |
double Zmax = (double)param->get_valeur((char*)"Boite3D_analyse_Zmax"); |
| 1156 |
boite_3d_analyse = new BOITE_3D(Xmin,Ymin,Zmin,Xmax,Ymax,Zmax); |
| 1157 |
} |
| 1158 |
int Analyse_erosion = (int)param->get_valeur((char*)"Analyse_erosion"); |
| 1159 |
FEM_SOLUTION* sol = m_mg_gestionnaire->get_fem_solution(Num_solution); |
| 1160 |
int nb_champ = sol->get_nb_champ(); |
| 1161 |
MSTRUCT_ANALYSE_CHAMP* analyse_champ = new MSTRUCT_ANALYSE_CHAMP(this,Identifiant,sol->get_id(),nb_champ,Largeur_colonne_distribution,Nom_groupe_forme,boite_3d_analyse); |
| 1162 |
if(Analyse_erosion) |
| 1163 |
{ |
| 1164 |
long Nb_couche = (long)param->get_valeur((char*)"Nb_couche"); |
| 1165 |
double Epaisseur_couche = (double)param->get_valeur((char*)"Epaisseur_couche"); |
| 1166 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion = new MSTRUCT_ANALYSE_EROSION(Identifiant,analyse_champ,Nb_couche,Epaisseur_couche); |
| 1167 |
analyse_erosion->executer(); |
| 1168 |
ajouter_analyse(analyse_erosion); |
| 1169 |
} |
| 1170 |
else |
| 1171 |
{ |
| 1172 |
analyse_champ->executer(); |
| 1173 |
ajouter_analyse(analyse_champ); |
| 1174 |
} |
| 1175 |
if(boite_3d_analyse!=NULL) delete boite_3d_analyse; |
| 1176 |
} |
| 1177 |
else if(Type_post_traitement==MSTRUCT::TYPE_POST_TRAITEMENT::POST_ORIENTATION) |
| 1178 |
{ |
| 1179 |
std::string Nom_groupe_forme = param->get_nom((char*)"Nom_groupe_forme"); |
| 1180 |
int Avec_fem_maillage = (int)param->get_valeur((char*)"Avec_fem_maillage"); |
| 1181 |
BOITE_3D *boite_3d_analyse=NULL; |
| 1182 |
int Boite_analyse = (int)param->get_valeur((char*)"Boite_analyse"); |
| 1183 |
if(Boite_analyse) |
| 1184 |
{ |
| 1185 |
double Xmin = (double)param->get_valeur((char*)"Boite3D_analyse_Xmin"); |
| 1186 |
double Ymin = (double)param->get_valeur((char*)"Boite3D_analyse_Ymin"); |
| 1187 |
double Zmin = (double)param->get_valeur((char*)"Boite3D_analyse_Zmin"); |
| 1188 |
double Xmax = (double)param->get_valeur((char*)"Boite3D_analyse_Xmax"); |
| 1189 |
double Ymax = (double)param->get_valeur((char*)"Boite3D_analyse_Ymax"); |
| 1190 |
double Zmax = (double)param->get_valeur((char*)"Boite3D_analyse_Zmax"); |
| 1191 |
boite_3d_analyse = new BOITE_3D(Xmin,Ymin,Zmin,Xmax,Ymax,Zmax); |
| 1192 |
} |
| 1193 |
MSTRUCT_ANALYSE_ORIENTATION* analyse_orientation = new MSTRUCT_ANALYSE_ORIENTATION(this,Identifiant,Nom_groupe_forme,boite_3d_analyse,Avec_fem_maillage); |
| 1194 |
int Analyse_erosion = (int)param->get_valeur((char*)"Analyse_erosion"); |
| 1195 |
if(Analyse_erosion) |
| 1196 |
{ |
| 1197 |
long Nb_couche = (long)param->get_valeur((char*)"Nb_couche"); |
| 1198 |
double Epaisseur_couche = (double)param->get_valeur((char*)"Epaisseur_couche"); |
| 1199 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion = new MSTRUCT_ANALYSE_EROSION(Identifiant,analyse_orientation,Nb_couche,Epaisseur_couche); |
| 1200 |
analyse_erosion->executer(); |
| 1201 |
ajouter_analyse(analyse_erosion); |
| 1202 |
} |
| 1203 |
else |
| 1204 |
{ |
| 1205 |
analyse_orientation->executer(); |
| 1206 |
ajouter_analyse(analyse_orientation); |
| 1207 |
} |
| 1208 |
if(boite_3d_analyse!=NULL) delete boite_3d_analyse; |
| 1209 |
} |
| 1210 |
else if(Type_post_traitement==MSTRUCT::TYPE_POST_TRAITEMENT::POST_CAO) |
| 1211 |
{ |
| 1212 |
std::string Nom_groupe_forme = param->get_nom((char*)"Nom_groupe_forme"); |
| 1213 |
double Largeur_colonne_distribution_volume_forme = (double)param->get_valeur((char*)"Largeur_colonne_distribution_volume_forme"); |
| 1214 |
MSTRUCT_ANALYSE_CAO* analyse_cao = new MSTRUCT_ANALYSE_CAO(this,Identifiant,Largeur_colonne_distribution_volume_forme,Nom_groupe_forme); |
| 1215 |
analyse_cao->executer(); |
| 1216 |
ajouter_analyse(analyse_cao); |
| 1217 |
} |
| 1218 |
else if(Type_post_traitement==MSTRUCT::TYPE_POST_TRAITEMENT::POST_PROPRIETE_MASSIQUE) |
| 1219 |
{ |
| 1220 |
std::string Nom_groupe_forme = param->get_nom((char*)"Nom_groupe_forme"); |
| 1221 |
MSTRUCT_ANALYSE_PROPRIETE_MASSIQUE* analyse_prop_mass = new MSTRUCT_ANALYSE_PROPRIETE_MASSIQUE(this,Identifiant,Nom_groupe_forme); |
| 1222 |
analyse_prop_mass->executer(); |
| 1223 |
ajouter_analyse(analyse_prop_mass); |
| 1224 |
} |
| 1225 |
else if(Type_post_traitement==MSTRUCT::TYPE_POST_TRAITEMENT::POST_MAILLAGE_MG) |
| 1226 |
{ |
| 1227 |
std::string Nom_groupe_forme = param->get_nom((char*)"Nom_groupe_forme"); |
| 1228 |
double Largeur_colonne_distribution_qualite_2D = (double)param->get_valeur((char*)"Largeur_colonne_distribution_qualite_2D"); |
| 1229 |
double Largeur_colonne_distribution_qualite_3D = (double)param->get_valeur((char*)"Largeur_colonne_distribution_qualite_3D"); |
| 1230 |
double Largeur_colonne_distribution_taille_2D = (double)param->get_valeur((char*)"Largeur_colonne_distribution_taille_2D"); |
| 1231 |
double Largeur_colonne_distribution_taille_3D = (double)param->get_valeur((char*)"Largeur_colonne_distribution_taille_3D"); |
| 1232 |
BOITE_3D *boite_3d_analyse=NULL; |
| 1233 |
int Boite_analyse = (int)param->get_valeur((char*)"Boite_analyse"); |
| 1234 |
if(Boite_analyse) |
| 1235 |
{ |
| 1236 |
double Xmin = (double)param->get_valeur((char*)"Boite3D_analyse_Xmin"); |
| 1237 |
double Ymin = (double)param->get_valeur((char*)"Boite3D_analyse_Ymin"); |
| 1238 |
double Zmin = (double)param->get_valeur((char*)"Boite3D_analyse_Zmin"); |
| 1239 |
double Xmax = (double)param->get_valeur((char*)"Boite3D_analyse_Xmax"); |
| 1240 |
double Ymax = (double)param->get_valeur((char*)"Boite3D_analyse_Ymax"); |
| 1241 |
double Zmax = (double)param->get_valeur((char*)"Boite3D_analyse_Zmax"); |
| 1242 |
boite_3d_analyse = new BOITE_3D(Xmin,Ymin,Zmin,Xmax,Ymax,Zmax); |
| 1243 |
} |
| 1244 |
MSTRUCT_ANALYSE_MG_MAILLAGE* analyse_mg_maillage = new MSTRUCT_ANALYSE_MG_MAILLAGE(this, |
| 1245 |
Identifiant, |
| 1246 |
m_mg_maillage->get_id(), |
| 1247 |
Largeur_colonne_distribution_qualite_2D, |
| 1248 |
Largeur_colonne_distribution_taille_2D, |
| 1249 |
Largeur_colonne_distribution_qualite_3D, |
| 1250 |
Largeur_colonne_distribution_taille_3D, |
| 1251 |
Nom_groupe_forme,boite_3d_analyse); |
| 1252 |
int Analyse_erosion = (int)param->get_valeur((char*)"Analyse_erosion"); |
| 1253 |
if(Analyse_erosion) |
| 1254 |
{ |
| 1255 |
long Nb_couche = (long)param->get_valeur((char*)"Nb_couche"); |
| 1256 |
double Epaisseur_couche = (double)param->get_valeur((char*)"Epaisseur_couche"); |
| 1257 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion = new MSTRUCT_ANALYSE_EROSION(Identifiant,analyse_mg_maillage,Nb_couche,Epaisseur_couche); |
| 1258 |
analyse_erosion->executer(); |
| 1259 |
ajouter_analyse(analyse_erosion); |
| 1260 |
} |
| 1261 |
else |
| 1262 |
{ |
| 1263 |
analyse_mg_maillage->executer(); |
| 1264 |
ajouter_analyse(analyse_mg_maillage); |
| 1265 |
} |
| 1266 |
if(boite_3d_analyse!=NULL) delete boite_3d_analyse; |
| 1267 |
} |
| 1268 |
else if(Type_post_traitement==MSTRUCT::TYPE_POST_TRAITEMENT::POST_MAILLAGE_FEM) |
| 1269 |
{ |
| 1270 |
std::string Nom_groupe_forme = param->get_nom((char*)"Nom_groupe_forme"); |
| 1271 |
double Largeur_colonne_distribution_jacobien_2D_min = (double)param->get_valeur((char*)"Largeur_colonne_distribution_jacobien_2D_min"); |
| 1272 |
double Largeur_colonne_distribution_jacobien_2D_max = (double)param->get_valeur((char*)"Largeur_colonne_distribution_jacobien_2D_max"); |
| 1273 |
double Largeur_colonne_distribution_jacobien_3D_min = (double)param->get_valeur((char*)"Largeur_colonne_distribution_jacobien_3D_min"); |
| 1274 |
double Largeur_colonne_distribution_jacobien_3D_max = (double)param->get_valeur((char*)"Largeur_colonne_distribution_jacobien_3D_max"); |
| 1275 |
double Largeur_colonne_distribution_distortion_2D = (double)param->get_valeur((char*)"Largeur_colonne_distribution_distortion_2D"); |
| 1276 |
double Largeur_colonne_distribution_distortion_3D = (double)param->get_valeur((char*)"Largeur_colonne_distribution_distortion_3D"); |
| 1277 |
BOITE_3D *boite_3d_analyse=NULL; |
| 1278 |
int Boite_analyse = (int)param->get_valeur((char*)"Boite_analyse"); |
| 1279 |
if(Boite_analyse) |
| 1280 |
{ |
| 1281 |
double Xmin = (double)param->get_valeur((char*)"Boite3D_analyse_Xmin"); |
| 1282 |
double Ymin = (double)param->get_valeur((char*)"Boite3D_analyse_Ymin"); |
| 1283 |
double Zmin = (double)param->get_valeur((char*)"Boite3D_analyse_Zmin"); |
| 1284 |
double Xmax = (double)param->get_valeur((char*)"Boite3D_analyse_Xmax"); |
| 1285 |
double Ymax = (double)param->get_valeur((char*)"Boite3D_analyse_Ymax"); |
| 1286 |
double Zmax = (double)param->get_valeur((char*)"Boite3D_analyse_Zmax"); |
| 1287 |
boite_3d_analyse = new BOITE_3D(Xmin,Ymin,Zmin,Xmax,Ymax,Zmax); |
| 1288 |
} |
| 1289 |
MSTRUCT_ANALYSE_FEM_MAILLAGE* analyse_maillage_fem = new MSTRUCT_ANALYSE_FEM_MAILLAGE(this, |
| 1290 |
Identifiant, |
| 1291 |
m_fem_maillage->get_id(), |
| 1292 |
Largeur_colonne_distribution_jacobien_2D_min, |
| 1293 |
Largeur_colonne_distribution_jacobien_2D_max, |
| 1294 |
Largeur_colonne_distribution_jacobien_3D_min, |
| 1295 |
Largeur_colonne_distribution_jacobien_3D_max, |
| 1296 |
Largeur_colonne_distribution_distortion_2D, |
| 1297 |
Largeur_colonne_distribution_distortion_3D, |
| 1298 |
Nom_groupe_forme, |
| 1299 |
boite_3d_analyse); |
| 1300 |
int Analyse_erosion = (int)param->get_valeur((char*)"Analyse_erosion"); |
| 1301 |
if(Analyse_erosion) |
| 1302 |
{ |
| 1303 |
long Nb_couche = (long)param->get_valeur((char*)"Nb_couche"); |
| 1304 |
double Epaisseur_couche = (double)param->get_valeur((char*)"Epaisseur_couche"); |
| 1305 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion = new MSTRUCT_ANALYSE_EROSION(Identifiant,analyse_maillage_fem,Nb_couche,Epaisseur_couche); |
| 1306 |
analyse_erosion->executer(); |
| 1307 |
ajouter_analyse(analyse_erosion); |
| 1308 |
} |
| 1309 |
else |
| 1310 |
{ |
| 1311 |
analyse_maillage_fem->executer(); |
| 1312 |
ajouter_analyse(analyse_maillage_fem); |
| 1313 |
} |
| 1314 |
if(boite_3d_analyse!=NULL) delete boite_3d_analyse; |
| 1315 |
} |
| 1316 |
else if(Type_post_traitement==MSTRUCT::TYPE_POST_TRAITEMENT::POST_CHAMP_NORMALISE) |
| 1317 |
{ |
| 1318 |
std::string Identifiant_champ = param->get_nom((char*)"Identifiant_champ"); |
| 1319 |
std::string Identifiant_champ_reference = param->get_nom((char*)"Identifiant_champ_reference"); |
| 1320 |
double Largeur_colonne_distribution = (double)param->get_valeur((char*)"Largeur_colonne_distribution"); |
| 1321 |
if(get_analyse(Identifiant_champ)->get_type()==MSTRUCT::TYPE_ANALYSE::CHAMP) |
| 1322 |
{ |
| 1323 |
MSTRUCT_ANALYSE_CHAMP* analyse_champ = (MSTRUCT_ANALYSE_CHAMP*)get_analyse(Identifiant_champ); |
| 1324 |
MSTRUCT_ANALYSE_CHAMP* analyse_champ_reference = (MSTRUCT_ANALYSE_CHAMP*)get_analyse(Identifiant_champ_reference); |
| 1325 |
double valeur_ref=0.0; |
| 1326 |
int nb_champ=analyse_champ_reference->get_nb_champ(); |
| 1327 |
for(int i=0;i<nb_champ;i++) |
| 1328 |
{ |
| 1329 |
valeur_ref+=analyse_champ_reference->get_moyenne()[i]*analyse_champ_reference->get_moyenne()[i]; |
| 1330 |
} |
| 1331 |
valeur_ref=sqrt(valeur_ref); |
| 1332 |
MSTRUCT_ANALYSE_CHAMP* analyse_normalise = analyse_champ->normaliser(Identifiant,valeur_ref,Largeur_colonne_distribution); |
| 1333 |
ajouter_analyse(analyse_normalise); |
| 1334 |
} |
| 1335 |
else if(get_analyse(Identifiant_champ)->get_type()==MSTRUCT::TYPE_ANALYSE::EROSION) |
| 1336 |
{ |
| 1337 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion_champ = (MSTRUCT_ANALYSE_EROSION*)get_analyse(Identifiant_champ); |
| 1338 |
double epaisseur_couche = analyse_erosion_champ->get_epaisseur_couche(); |
| 1339 |
std::string Nom_groupe_forme = analyse_erosion_champ->get_nom_groupe_forme(); |
| 1340 |
BOITE_3D *boite_3d_analyse=analyse_erosion_champ->get_boite_analyse(); |
| 1341 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion_normalise = new MSTRUCT_ANALYSE_EROSION(Identifiant,epaisseur_couche,Nom_groupe_forme,boite_3d_analyse); |
| 1342 |
std::vector<MSTRUCT_ANALYSE*>::iterator it_analyse_erosion; |
| 1343 |
int k=0; |
| 1344 |
double valeur_ref=0.0; |
| 1345 |
for(MSTRUCT_ANALYSE* analyse=analyse_erosion_champ->get_premiere_analyse(it_analyse_erosion);analyse!=NULL;analyse=analyse_erosion_champ->get_suivante_analyse(it_analyse_erosion)) |
| 1346 |
{ |
| 1347 |
if(k==0) |
| 1348 |
{ |
| 1349 |
std::vector<MSTRUCT_ANALYSE*>::iterator it_analyse_erosion_reference; |
| 1350 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion_champ_reference = (MSTRUCT_ANALYSE_EROSION*)get_analyse(Identifiant_champ_reference); |
| 1351 |
MSTRUCT_ANALYSE_CHAMP* analyse_champ_reference = (MSTRUCT_ANALYSE_CHAMP*)analyse_erosion_champ_reference->get_premiere_analyse(it_analyse_erosion_reference); |
| 1352 |
int nb_champ=analyse_champ_reference->get_nb_champ(); |
| 1353 |
for(int i=0;i<nb_champ;i++) |
| 1354 |
{ |
| 1355 |
valeur_ref+=analyse_champ_reference->get_moyenne()[i]*analyse_champ_reference->get_moyenne()[i]; |
| 1356 |
} |
| 1357 |
valeur_ref=sqrt(valeur_ref); |
| 1358 |
} |
| 1359 |
MSTRUCT_ANALYSE_CHAMP* analyse_champ = (MSTRUCT_ANALYSE_CHAMP*)analyse; |
| 1360 |
MSTRUCT_ANALYSE_CHAMP* analyse_normalise = analyse_champ->normaliser(Identifiant,valeur_ref,Largeur_colonne_distribution); |
| 1361 |
analyse_erosion_normalise->ajouter_analyse(analyse_normalise); |
| 1362 |
k++; |
| 1363 |
} |
| 1364 |
ajouter_analyse(analyse_erosion_normalise); |
| 1365 |
} |
| 1366 |
} |
| 1367 |
else if(Type_post_traitement==MSTRUCT::TYPE_POST_TRAITEMENT::POST_CHAMP_ECART) |
| 1368 |
{ |
| 1369 |
std::string Identifiant_champ = param->get_nom((char*)"Identifiant_champ"); |
| 1370 |
if(get_analyse(Identifiant_champ)==NULL) |
| 1371 |
{ |
| 1372 |
std::cerr << "*** Analyse [" << Identifiant << "] inexistante ***" << std::endl; |
| 1373 |
return FAIL; |
| 1374 |
} |
| 1375 |
std::string Identifiant_champ_compare = param->get_nom((char*)"Identifiant_champ_compare"); |
| 1376 |
if(get_analyse(Identifiant_champ_compare)==NULL) |
| 1377 |
{ |
| 1378 |
std::cerr << "*** Analyse [" << Identifiant << "] inexistante ***" << std::endl; |
| 1379 |
return FAIL; |
| 1380 |
} |
| 1381 |
double Largeur_colonne_distribution = (double)param->get_valeur((char*)"Largeur_colonne_distribution"); |
| 1382 |
int Type_ecart = (int)param->get_valeur((char*)"Type_ecart"); |
| 1383 |
if(get_analyse(Identifiant_champ)->get_type()==MSTRUCT::TYPE_ANALYSE::CHAMP) |
| 1384 |
{ |
| 1385 |
MSTRUCT_ANALYSE_CHAMP* analyse_champ = (MSTRUCT_ANALYSE_CHAMP*)get_analyse(Identifiant_champ); |
| 1386 |
MSTRUCT_ANALYSE* analyse_compare = get_analyse(Identifiant_champ_compare); |
| 1387 |
if(analyse_compare->get_type()==MSTRUCT::TYPE_ANALYSE::CHAMP) |
| 1388 |
{ |
| 1389 |
MSTRUCT_ANALYSE_CHAMP* analyse_champ_compare = (MSTRUCT_ANALYSE_CHAMP*)analyse_compare; |
| 1390 |
MSTRUCT_ANALYSE_CHAMP* analyse_ecart = analyse_champ->calculer_ecart(Identifiant,Largeur_colonne_distribution,analyse_champ_compare,Type_ecart); |
| 1391 |
ajouter_analyse(analyse_ecart); |
| 1392 |
} |
| 1393 |
else if(analyse_compare->get_type()==MSTRUCT::TYPE_ANALYSE::EROSION) |
| 1394 |
{ |
| 1395 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion_compare = (MSTRUCT_ANALYSE_EROSION*)analyse_compare; |
| 1396 |
int Num_couche = (int)param->get_valeur((char*)"Num_couche"); |
| 1397 |
if(Num_couche>=0) |
| 1398 |
{ |
| 1399 |
MSTRUCT_ANALYSE_CHAMP* analyse_champ_compare=(MSTRUCT_ANALYSE_CHAMP*)analyse_erosion_compare->get_analyse(Num_couche); |
| 1400 |
MSTRUCT_ANALYSE_CHAMP* analyse_ecart = analyse_champ->calculer_ecart(Identifiant,Largeur_colonne_distribution,analyse_champ_compare,Type_ecart); |
| 1401 |
ajouter_analyse(analyse_ecart); |
| 1402 |
} |
| 1403 |
else |
| 1404 |
{ |
| 1405 |
double epaisseur_couche = analyse_erosion_compare->get_epaisseur_couche(); |
| 1406 |
std::string Nom_groupe_forme = analyse_erosion_compare->get_nom_groupe_forme(); |
| 1407 |
BOITE_3D *boite_3d_analyse=analyse_erosion_compare->get_boite_analyse(); |
| 1408 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion_ecart = new MSTRUCT_ANALYSE_EROSION(Identifiant,epaisseur_couche,Nom_groupe_forme,boite_3d_analyse); |
| 1409 |
std::vector<MSTRUCT_ANALYSE*>::iterator it_analyse_erosion; |
| 1410 |
for(MSTRUCT_ANALYSE* analyse_champ_compare=analyse_erosion_compare->get_premiere_analyse(it_analyse_erosion);analyse_champ_compare!=NULL;analyse_champ_compare=analyse_erosion_compare->get_suivante_analyse(it_analyse_erosion)) |
| 1411 |
{ |
| 1412 |
MSTRUCT_ANALYSE_CHAMP* analyse_ecart = analyse_champ->calculer_ecart(Identifiant,Largeur_colonne_distribution,(MSTRUCT_ANALYSE_CHAMP*)analyse_champ_compare,Type_ecart); |
| 1413 |
analyse_erosion_ecart->ajouter_analyse(analyse_ecart); |
| 1414 |
} |
| 1415 |
ajouter_analyse(analyse_erosion_ecart); |
| 1416 |
} |
| 1417 |
|
| 1418 |
} |
| 1419 |
} |
| 1420 |
else if(get_analyse(Identifiant_champ)->get_type()==MSTRUCT::TYPE_ANALYSE::EROSION) |
| 1421 |
{ |
| 1422 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion_champ = (MSTRUCT_ANALYSE_EROSION*)get_analyse(Identifiant_champ); |
| 1423 |
double epaisseur_couche = analyse_erosion_champ->get_epaisseur_couche(); |
| 1424 |
std::string Nom_groupe_forme = analyse_erosion_champ->get_nom_groupe_forme(); |
| 1425 |
BOITE_3D *boite_3d_analyse=analyse_erosion_champ->get_boite_analyse(); |
| 1426 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion_ecart = new MSTRUCT_ANALYSE_EROSION(Identifiant,epaisseur_couche,Nom_groupe_forme,boite_3d_analyse); |
| 1427 |
std::vector<MSTRUCT_ANALYSE*>::iterator it_analyse_erosion; |
| 1428 |
for(MSTRUCT_ANALYSE* analyse=analyse_erosion_champ->get_premiere_analyse(it_analyse_erosion);analyse!=NULL;analyse=analyse_erosion_champ->get_suivante_analyse(it_analyse_erosion)) |
| 1429 |
{ |
| 1430 |
MSTRUCT_ANALYSE_CHAMP* analyse_champ = (MSTRUCT_ANALYSE_CHAMP*)analyse; |
| 1431 |
MSTRUCT_ANALYSE* analyse_compare = get_analyse(Identifiant_champ_compare); |
| 1432 |
if(analyse_compare->get_type()==MSTRUCT::TYPE_ANALYSE::CHAMP) |
| 1433 |
{ |
| 1434 |
MSTRUCT_ANALYSE_CHAMP* analyse_champ_compare = (MSTRUCT_ANALYSE_CHAMP*)analyse_compare; |
| 1435 |
MSTRUCT_ANALYSE_CHAMP* analyse_ecart = analyse_champ->calculer_ecart(Identifiant,Largeur_colonne_distribution,analyse_champ_compare,Type_ecart); |
| 1436 |
analyse_erosion_ecart->ajouter_analyse(analyse_ecart); |
| 1437 |
} |
| 1438 |
else if(analyse_compare->get_type()==MSTRUCT::TYPE_ANALYSE::EROSION) |
| 1439 |
{ |
| 1440 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion_compare = (MSTRUCT_ANALYSE_EROSION*)analyse_compare; |
| 1441 |
int Num_couche = (int)param->get_valeur((char*)"Num_couche"); |
| 1442 |
if(Num_couche>=0) |
| 1443 |
{ |
| 1444 |
MSTRUCT_ANALYSE_CHAMP* analyse_champ_compare=(MSTRUCT_ANALYSE_CHAMP*)analyse_erosion_compare->get_analyse(Num_couche); |
| 1445 |
MSTRUCT_ANALYSE_CHAMP* analyse_ecart = analyse_champ->calculer_ecart(Identifiant,Largeur_colonne_distribution,analyse_champ_compare,Type_ecart); |
| 1446 |
analyse_erosion_ecart->ajouter_analyse(analyse_ecart); |
| 1447 |
} |
| 1448 |
else |
| 1449 |
{ |
| 1450 |
|
| 1451 |
} |
| 1452 |
|
| 1453 |
} |
| 1454 |
} |
| 1455 |
ajouter_analyse(analyse_erosion_ecart); |
| 1456 |
} |
| 1457 |
} |
| 1458 |
else if(Type_post_traitement==MSTRUCT::TYPE_POST_TRAITEMENT::POST_CHAMP_ECART_CHARGEMENT) |
| 1459 |
{ |
| 1460 |
std::string Identifiant_champ = param->get_nom((char*)"Identifiant_champ"); |
| 1461 |
if(get_analyse(Identifiant_champ)==NULL) |
| 1462 |
{ |
| 1463 |
std::cerr << "*** Analyse [" << Identifiant << "] inexistante ***" << std::endl; |
| 1464 |
return FAIL; |
| 1465 |
} |
| 1466 |
double Largeur_colonne_distribution = (double)param->get_valeur((char*)"Largeur_colonne_distribution"); |
| 1467 |
int Type_chargement = (int)param->get_valeur((char*)"Type_chargement"); |
| 1468 |
int Type_ecart = (int)param->get_valeur((char*)"Type_ecart"); |
| 1469 |
if(get_analyse(Identifiant_champ)->get_type()==MSTRUCT::TYPE_ANALYSE::CHAMP) |
| 1470 |
{ |
| 1471 |
MSTRUCT_ANALYSE_CHAMP* analyse_champ = (MSTRUCT_ANALYSE_CHAMP*)get_analyse(Identifiant_champ); |
| 1472 |
MSTRUCT_ANALYSE_CHAMP* analyse_ecart = analyse_champ->calculer_ecart_chargement(Identifiant,Largeur_colonne_distribution,Type_chargement,Type_ecart); |
| 1473 |
ajouter_analyse(analyse_ecart); |
| 1474 |
} |
| 1475 |
else if(get_analyse(Identifiant_champ)->get_type()==MSTRUCT::TYPE_ANALYSE::EROSION) |
| 1476 |
{ |
| 1477 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion_champ = (MSTRUCT_ANALYSE_EROSION*)get_analyse(Identifiant_champ); |
| 1478 |
double epaisseur_couche = analyse_erosion_champ->get_epaisseur_couche(); |
| 1479 |
std::string Nom_groupe_forme = analyse_erosion_champ->get_nom_groupe_forme(); |
| 1480 |
BOITE_3D *boite_3d_analyse=analyse_erosion_champ->get_boite_analyse(); |
| 1481 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion_ecart = new MSTRUCT_ANALYSE_EROSION(Identifiant,epaisseur_couche,Nom_groupe_forme,boite_3d_analyse); |
| 1482 |
std::vector<MSTRUCT_ANALYSE*>::iterator it_analyse_erosion; |
| 1483 |
for(MSTRUCT_ANALYSE* analyse=analyse_erosion_champ->get_premiere_analyse(it_analyse_erosion);analyse!=NULL;analyse=analyse_erosion_champ->get_suivante_analyse(it_analyse_erosion)) |
| 1484 |
{ |
| 1485 |
MSTRUCT_ANALYSE_CHAMP* analyse_champ = (MSTRUCT_ANALYSE_CHAMP*)analyse; |
| 1486 |
MSTRUCT_ANALYSE_CHAMP* analyse_ecart = analyse_champ->calculer_ecart_chargement(Identifiant,Largeur_colonne_distribution,Type_chargement,Type_ecart); |
| 1487 |
analyse_erosion_ecart->ajouter_analyse(analyse_ecart); |
| 1488 |
} |
| 1489 |
ajouter_analyse(analyse_erosion_ecart); |
| 1490 |
} |
| 1491 |
} |
| 1492 |
else if(Type_post_traitement==MSTRUCT::TYPE_POST_TRAITEMENT::POST_ORIENTATION_ECART) |
| 1493 |
{ |
| 1494 |
std::string Identifiant_orientation = param->get_nom((char*)"Identifiant_orientation"); |
| 1495 |
if(get_analyse(Identifiant_orientation)==NULL) |
| 1496 |
{ |
| 1497 |
std::cerr << "*** Analyse [" << Identifiant << "] inexistante ***" << std::endl; |
| 1498 |
return FAIL; |
| 1499 |
} |
| 1500 |
int Type_ecart = (int)param->get_valeur((char*)"Type_ecart"); |
| 1501 |
double tenseur_compare[6]; |
| 1502 |
tenseur_compare[0] = (double)param->get_valeur((char*)"a_11"); |
| 1503 |
tenseur_compare[1] = (double)param->get_valeur((char*)"a_22"); |
| 1504 |
tenseur_compare[2] = (double)param->get_valeur((char*)"a_33"); |
| 1505 |
tenseur_compare[3] = (double)param->get_valeur((char*)"a_12"); |
| 1506 |
tenseur_compare[4] = (double)param->get_valeur((char*)"a_23"); |
| 1507 |
tenseur_compare[5] = (double)param->get_valeur((char*)"a_13"); |
| 1508 |
if(get_analyse(Identifiant_orientation)->get_type()==MSTRUCT::TYPE_ANALYSE::ORIENTATION) |
| 1509 |
{ |
| 1510 |
MSTRUCT_ANALYSE_ORIENTATION* analyse_orientation = (MSTRUCT_ANALYSE_ORIENTATION*)get_analyse(Identifiant_orientation); |
| 1511 |
MSTRUCT_ANALYSE_ORIENTATION* analyse_compare = analyse_orientation->calculer_ecart(Identifiant,tenseur_compare,Type_ecart); |
| 1512 |
ajouter_analyse(analyse_compare); |
| 1513 |
} |
| 1514 |
else if(get_analyse(Identifiant_orientation)->get_type()==MSTRUCT::TYPE_ANALYSE::EROSION) |
| 1515 |
{ |
| 1516 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion_orientation = (MSTRUCT_ANALYSE_EROSION*)get_analyse(Identifiant_orientation); |
| 1517 |
double epaisseur_couche = analyse_erosion_orientation->get_epaisseur_couche(); |
| 1518 |
std::string Nom_groupe_forme = analyse_erosion_orientation->get_nom_groupe_forme(); |
| 1519 |
BOITE_3D *boite_3d_analyse=analyse_erosion_orientation->get_boite_analyse(); |
| 1520 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion_ecart = new MSTRUCT_ANALYSE_EROSION(Identifiant,epaisseur_couche,Nom_groupe_forme,boite_3d_analyse); |
| 1521 |
std::vector<MSTRUCT_ANALYSE*>::iterator it_analyse_erosion; |
| 1522 |
for(MSTRUCT_ANALYSE* analyse=analyse_erosion_orientation->get_premiere_analyse(it_analyse_erosion);analyse!=NULL;analyse=analyse_erosion_orientation->get_suivante_analyse(it_analyse_erosion)) |
| 1523 |
{ |
| 1524 |
MSTRUCT_ANALYSE_ORIENTATION* analyse_orientation = (MSTRUCT_ANALYSE_ORIENTATION*)analyse; |
| 1525 |
MSTRUCT_ANALYSE_ORIENTATION* analyse_compare = analyse_orientation->calculer_ecart(Identifiant,tenseur_compare,Type_ecart); |
| 1526 |
analyse_erosion_ecart->ajouter_analyse(analyse_compare); |
| 1527 |
} |
| 1528 |
ajouter_analyse(analyse_erosion_ecart); |
| 1529 |
} |
| 1530 |
} |
| 1531 |
else if(Type_post_traitement==MSTRUCT::TYPE_POST_TRAITEMENT::POST_CONDUCTIVITE_THERMIQUE) |
| 1532 |
{ |
| 1533 |
long Num_solution_temp=(long)param->get_valeur((char*)"Num_solution_temp"); |
| 1534 |
long Num_solution_flux=(long)param->get_valeur((char*)"Num_solution_flux"); |
| 1535 |
int Direction=(int)param->get_valeur((char*)"Direction"); |
| 1536 |
BOITE_3D *boite_3d_analyse=NULL; |
| 1537 |
int Boite_analyse = (int)param->get_valeur((char*)"Boite_analyse"); |
| 1538 |
if(Boite_analyse) |
| 1539 |
{ |
| 1540 |
double Xmin = (double)param->get_valeur((char*)"Boite3D_analyse_Xmin"); |
| 1541 |
double Ymin = (double)param->get_valeur((char*)"Boite3D_analyse_Ymin"); |
| 1542 |
double Zmin = (double)param->get_valeur((char*)"Boite3D_analyse_Zmin"); |
| 1543 |
double Xmax = (double)param->get_valeur((char*)"Boite3D_analyse_Xmax"); |
| 1544 |
double Ymax = (double)param->get_valeur((char*)"Boite3D_analyse_Ymax"); |
| 1545 |
double Zmax = (double)param->get_valeur((char*)"Boite3D_analyse_Zmax"); |
| 1546 |
boite_3d_analyse = new BOITE_3D(Xmin,Ymin,Zmin,Xmax,Ymax,Zmax); |
| 1547 |
} |
| 1548 |
int Analyse_erosion = (int)param->get_valeur((char*)"Analyse_erosion"); |
| 1549 |
FEM_SOLUTION * fem_sol_temp=get_mg_gestionnaire()->get_fem_solution(Num_solution_temp); |
| 1550 |
FEM_SOLUTION * fem_sol_flux=get_mg_gestionnaire()->get_fem_solution(Num_solution_flux); |
| 1551 |
MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE* analyse_cond_ther = new MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE(this,Identifiant,fem_sol_temp->get_id(),fem_sol_flux->get_id(),Direction,boite_3d_analyse); |
| 1552 |
if(Analyse_erosion) |
| 1553 |
{ |
| 1554 |
long Nb_couche = (long)param->get_valeur((char*)"Nb_couche"); |
| 1555 |
double Epaisseur_couche = (double)param->get_valeur((char*)"Epaisseur_couche"); |
| 1556 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion = new MSTRUCT_ANALYSE_EROSION(Identifiant,analyse_cond_ther,Nb_couche,Epaisseur_couche); |
| 1557 |
analyse_erosion->executer(); |
| 1558 |
ajouter_analyse(analyse_erosion); |
| 1559 |
} |
| 1560 |
else |
| 1561 |
{ |
| 1562 |
analyse_cond_ther->executer(); |
| 1563 |
ajouter_analyse(analyse_cond_ther); |
| 1564 |
} |
| 1565 |
if(boite_3d_analyse!=NULL) delete boite_3d_analyse; |
| 1566 |
} |
| 1567 |
else if(Type_post_traitement==MSTRUCT::TYPE_POST_TRAITEMENT::POST_ENERGIE_HILL) |
| 1568 |
{ |
| 1569 |
long Num_solution_temp=(long)param->get_valeur((char*)"Num_solution_epsilon"); |
| 1570 |
long Num_solution_flux=(long)param->get_valeur((char*)"Num_solution_sigma"); |
| 1571 |
BOITE_3D *boite_3d_analyse=NULL; |
| 1572 |
int Boite_analyse = (int)param->get_valeur((char*)"Boite_analyse"); |
| 1573 |
if(Boite_analyse) |
| 1574 |
{ |
| 1575 |
double Xmin = (double)param->get_valeur((char*)"Boite3D_analyse_Xmin"); |
| 1576 |
double Ymin = (double)param->get_valeur((char*)"Boite3D_analyse_Ymin"); |
| 1577 |
double Zmin = (double)param->get_valeur((char*)"Boite3D_analyse_Zmin"); |
| 1578 |
double Xmax = (double)param->get_valeur((char*)"Boite3D_analyse_Xmax"); |
| 1579 |
double Ymax = (double)param->get_valeur((char*)"Boite3D_analyse_Ymax"); |
| 1580 |
double Zmax = (double)param->get_valeur((char*)"Boite3D_analyse_Zmax"); |
| 1581 |
boite_3d_analyse = new BOITE_3D(Xmin,Ymin,Zmin,Xmax,Ymax,Zmax); |
| 1582 |
} |
| 1583 |
int Analyse_erosion = (int)param->get_valeur((char*)"Analyse_erosion"); |
| 1584 |
FEM_SOLUTION * fem_sol_temp=get_mg_gestionnaire()->get_fem_solution(Num_solution_temp); |
| 1585 |
FEM_SOLUTION * fem_sol_flux=get_mg_gestionnaire()->get_fem_solution(Num_solution_flux); |
| 1586 |
MSTRUCT_ANALYSE_ENERGIE_HILL* analyse_cond_ther = new MSTRUCT_ANALYSE_ENERGIE_HILL(this,Identifiant,fem_sol_temp->get_id(),fem_sol_flux->get_id(),boite_3d_analyse); |
| 1587 |
if(Analyse_erosion) |
| 1588 |
{ |
| 1589 |
long Nb_couche = (long)param->get_valeur((char*)"Nb_couche"); |
| 1590 |
double Epaisseur_couche = (double)param->get_valeur((char*)"Epaisseur_couche"); |
| 1591 |
MSTRUCT_ANALYSE_EROSION* analyse_erosion = new MSTRUCT_ANALYSE_EROSION(Identifiant,analyse_cond_ther,Nb_couche,Epaisseur_couche); |
| 1592 |
analyse_erosion->executer(); |
| 1593 |
ajouter_analyse(analyse_erosion); |
| 1594 |
} |
| 1595 |
else |
| 1596 |
{ |
| 1597 |
analyse_cond_ther->executer(); |
| 1598 |
ajouter_analyse(analyse_cond_ther); |
| 1599 |
} |
| 1600 |
if(boite_3d_analyse!=NULL) delete boite_3d_analyse; |
| 1601 |
} |
| 1602 |
else if(Type_post_traitement==MSTRUCT::TYPE_POST_TRAITEMENT::POST_TEMPS) |
| 1603 |
{ |
| 1604 |
|
| 1605 |
} |
| 1606 |
else |
| 1607 |
{ |
| 1608 |
sprintf(ligne,"ERREUR -> %s",Identifiant.c_str()); |
| 1609 |
affiche(ligne); |
| 1610 |
} |
| 1611 |
} |
| 1612 |
ot_cpu.ajouter_etape((char*)"analyse"); |
| 1613 |
double temps_analyse; |
| 1614 |
ot_cpu.get_etape((char*)"analyse",temps_analyse); |
| 1615 |
change_temps_analyse(get_temps_analyse()+temps_analyse); |
| 1616 |
return 0; |
| 1617 |
} |
| 1618 |
|
| 1619 |
int MSTRUCT_VES::generer_post_traitement(std::vector<OT_PARAMETRES *>& vector_params_post_traitement, |
| 1620 |
MSTRUCT_VES_FILE* ves_sph, |
| 1621 |
MSTRUCT_VES_FILE* ves_dev) |
| 1622 |
{ |
| 1623 |
OT_CPU ot_cpu; |
| 1624 |
ot_cpu.initialise(); |
| 1625 |
std::vector<OT_PARAMETRES*>::iterator it; |
| 1626 |
char ligne[1000]; |
| 1627 |
for(it=vector_params_post_traitement.begin();it!=vector_params_post_traitement.end();it++) |
| 1628 |
{ |
| 1629 |
OT_PARAMETRES* param = *it; |
| 1630 |
int Type_post_traitement = (int)param->get_valeur((char*)"Type_post_traitement"); |
| 1631 |
std::string Identifiant = param->get_nom((char*)"Identifiant"); |
| 1632 |
if(get_analyse(Identifiant)!=NULL) |
| 1633 |
{ |
| 1634 |
std::cerr << "*** Analyse [" << Identifiant << "] existante ***" << std::endl; |
| 1635 |
return FAIL; |
| 1636 |
} |
| 1637 |
sprintf(ligne,"-> %s",Identifiant.c_str()); |
| 1638 |
affiche(ligne); |
| 1639 |
if(Type_post_traitement==MSTRUCT::TYPE_POST_TRAITEMENT::POST_MODULES_ELASTICITE) |
| 1640 |
{ |
| 1641 |
std::string Identifiant_epsilon = param->get_nom((char*)"Identifiant_epsilon"); |
| 1642 |
std::string Identifiant_sigma = param->get_nom((char*)"Identifiant_sigma"); |
| 1643 |
if(ves_sph->get_analyse(Identifiant_epsilon)->get_type()==MSTRUCT::TYPE_ANALYSE::CHAMP) |
| 1644 |
{ |
| 1645 |
MSTRUCT_ANALYSE_CHAMP* epsilon_sph = (MSTRUCT_ANALYSE_CHAMP*)ves_sph->get_analyse(Identifiant_epsilon); |
| 1646 |
MSTRUCT_ANALYSE_CHAMP* sigma_sph = (MSTRUCT_ANALYSE_CHAMP*)ves_sph->get_analyse(Identifiant_sigma); |
| 1647 |
MSTRUCT_ANALYSE_CHAMP* epsilon_dev = (MSTRUCT_ANALYSE_CHAMP*)ves_dev->get_analyse(Identifiant_epsilon); |
| 1648 |
MSTRUCT_ANALYSE_CHAMP* sigma_dev = (MSTRUCT_ANALYSE_CHAMP*)ves_dev->get_analyse(Identifiant_sigma); |
| 1649 |
MSTRUCT_ANALYSE_MODULES_ELASTICITE* analyse_modules_elasticite = new MSTRUCT_ANALYSE_MODULES_ELASTICITE(Identifiant,epsilon_sph,sigma_sph,epsilon_dev,sigma_dev); |
| 1650 |
analyse_modules_elasticite->executer(); |
| 1651 |
ajouter_analyse(analyse_modules_elasticite); |
| 1652 |
} |
| 1653 |
else if(ves_sph->get_analyse(Identifiant_epsilon)->get_type()==MSTRUCT::TYPE_ANALYSE::EROSION) |
| 1654 |
{ |
| 1655 |
MSTRUCT_ANALYSE_EROSION* epsilon_sph_erosion = (MSTRUCT_ANALYSE_EROSION*)ves_sph->get_analyse(Identifiant_epsilon); |
| 1656 |
MSTRUCT_ANALYSE_EROSION* sigma_sph_erosion = (MSTRUCT_ANALYSE_EROSION*)ves_sph->get_analyse(Identifiant_sigma); |
| 1657 |
MSTRUCT_ANALYSE_EROSION* epsilon_dev_erosion = (MSTRUCT_ANALYSE_EROSION*)ves_dev->get_analyse(Identifiant_epsilon); |
| 1658 |
MSTRUCT_ANALYSE_EROSION* sigma_dev_erosion = (MSTRUCT_ANALYSE_EROSION*)ves_dev->get_analyse(Identifiant_sigma); |
| 1659 |
long Nb_couche = epsilon_sph_erosion->get_nb_analyse(); |
| 1660 |
double Epaisseur_couche = epsilon_sph_erosion->get_epaisseur_couche(); |
| 1661 |
std::string Nom_groupe_forme = epsilon_sph_erosion->get_nom_groupe_forme(); |
| 1662 |
BOITE_3D *boite_3d_analyse=epsilon_sph_erosion->get_boite_analyse(); |
| 1663 |
MSTRUCT_ANALYSE_EROSION* analyse_modules_elasticite_erosion = new MSTRUCT_ANALYSE_EROSION(Identifiant,Epaisseur_couche,Nom_groupe_forme,boite_3d_analyse); |
| 1664 |
for(int i=0;i<Nb_couche;i++) |
| 1665 |
{ |
| 1666 |
MSTRUCT_ANALYSE_MODULES_ELASTICITE* analyse_modules_elasticite = new MSTRUCT_ANALYSE_MODULES_ELASTICITE(Identifiant, |
| 1667 |
(MSTRUCT_ANALYSE_CHAMP*)epsilon_sph_erosion->get_analyse(i), |
| 1668 |
(MSTRUCT_ANALYSE_CHAMP*)sigma_sph_erosion->get_analyse(i), |
| 1669 |
(MSTRUCT_ANALYSE_CHAMP*)epsilon_dev_erosion->get_analyse(i), |
| 1670 |
(MSTRUCT_ANALYSE_CHAMP*)sigma_dev_erosion->get_analyse(i)); |
| 1671 |
analyse_modules_elasticite->executer(); |
| 1672 |
analyse_modules_elasticite_erosion->ajouter_analyse(analyse_modules_elasticite); |
| 1673 |
} |
| 1674 |
ajouter_analyse(analyse_modules_elasticite_erosion); |
| 1675 |
} |
| 1676 |
} |
| 1677 |
else |
| 1678 |
{ |
| 1679 |
sprintf(ligne,"ERREUR -> %s",Identifiant.c_str()); |
| 1680 |
affiche(ligne); |
| 1681 |
} |
| 1682 |
} |
| 1683 |
ot_cpu.ajouter_etape((char*)"analyse"); |
| 1684 |
double temps_analyse; |
| 1685 |
ot_cpu.get_etape((char*)"analyse",temps_analyse); |
| 1686 |
change_temps_analyse(get_temps_analyse()+temps_analyse); |
| 1687 |
return 0; |
| 1688 |
|
| 1689 |
} |
| 1690 |
|
| 1691 |
int MSTRUCT_VES::generer_post_traitement(std::vector<OT_PARAMETRES *>& vector_params_post_traitement, |
| 1692 |
MSTRUCT_VES_FILE* ves_lambda_x, |
| 1693 |
MSTRUCT_VES_FILE* ves_lambda_y, |
| 1694 |
MSTRUCT_VES_FILE* ves_lambda_z) |
| 1695 |
{ |
| 1696 |
OT_CPU ot_cpu; |
| 1697 |
ot_cpu.initialise(); |
| 1698 |
std::vector<OT_PARAMETRES*>::iterator it; |
| 1699 |
char ligne[1000]; |
| 1700 |
for(it=vector_params_post_traitement.begin();it!=vector_params_post_traitement.end();it++) |
| 1701 |
{ |
| 1702 |
OT_PARAMETRES* param = *it; |
| 1703 |
int Type_post_traitement = (int)param->get_valeur((char*)"Type_post_traitement"); |
| 1704 |
std::string Identifiant = param->get_nom((char*)"Identifiant"); |
| 1705 |
if(get_analyse(Identifiant)!=NULL) |
| 1706 |
{ |
| 1707 |
std::cerr << "*** Analyse [" << Identifiant << "] existante ***" << std::endl; |
| 1708 |
return FAIL; |
| 1709 |
} |
| 1710 |
sprintf(ligne,"-> %s",Identifiant.c_str()); |
| 1711 |
affiche(ligne); |
| 1712 |
if(Type_post_traitement==MSTRUCT::TYPE_POST_TRAITEMENT::POST_CONDUCTIVITE_THERMIQUE) |
| 1713 |
{ |
| 1714 |
std::string Identifiant = param->get_nom((char*)"Identifiant"); |
| 1715 |
if(ves_lambda_x->get_analyse(Identifiant)->get_type()==MSTRUCT::TYPE_ANALYSE::EROSION && |
| 1716 |
ves_lambda_y->get_analyse(Identifiant)->get_type()==MSTRUCT::TYPE_ANALYSE::EROSION && |
| 1717 |
ves_lambda_z->get_analyse(Identifiant)->get_type()==MSTRUCT::TYPE_ANALYSE::EROSION) |
| 1718 |
{ |
| 1719 |
MSTRUCT_ANALYSE_EROSION* erosion_lambda_x = (MSTRUCT_ANALYSE_EROSION*)ves_lambda_x->get_analyse(Identifiant); |
| 1720 |
MSTRUCT_ANALYSE_EROSION* erosion_lambda_y = (MSTRUCT_ANALYSE_EROSION*)ves_lambda_y->get_analyse(Identifiant); |
| 1721 |
MSTRUCT_ANALYSE_EROSION* erosion_lambda_z = (MSTRUCT_ANALYSE_EROSION*)ves_lambda_z->get_analyse(Identifiant); |
| 1722 |
std::vector<MSTRUCT_ANALYSE*>::iterator it_analyse_x; |
| 1723 |
std::vector<MSTRUCT_ANALYSE*>::iterator it_analyse_y; |
| 1724 |
std::vector<MSTRUCT_ANALYSE*>::iterator it_analyse_z; |
| 1725 |
MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE* analyse_lambda_x=(MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE*)erosion_lambda_x->get_premiere_analyse(it_analyse_x); |
| 1726 |
MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE* analyse_lambda_y=(MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE*)erosion_lambda_y->get_premiere_analyse(it_analyse_y); |
| 1727 |
MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE* analyse_lambda_z=(MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE*)erosion_lambda_z->get_premiere_analyse(it_analyse_z); |
| 1728 |
MSTRUCT_ANALYSE_EROSION* erosion_lambda_app = new MSTRUCT_ANALYSE_EROSION(Identifiant, |
| 1729 |
erosion_lambda_x->get_epaisseur_couche(), |
| 1730 |
erosion_lambda_x->get_nom_groupe_forme(), |
| 1731 |
erosion_lambda_x->get_boite_analyse()); |
| 1732 |
while(analyse_lambda_x!=NULL && analyse_lambda_y!=NULL && analyse_lambda_z!=NULL) |
| 1733 |
{ |
| 1734 |
MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE* analyse_lambda_app = new MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE(Identifiant,analyse_lambda_x,analyse_lambda_y,analyse_lambda_z); |
| 1735 |
analyse_lambda_app->executer(); |
| 1736 |
erosion_lambda_app->ajouter_analyse(analyse_lambda_app); |
| 1737 |
analyse_lambda_x=(MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE*)erosion_lambda_x->get_suivante_analyse(it_analyse_x); |
| 1738 |
analyse_lambda_y=(MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE*)erosion_lambda_y->get_suivante_analyse(it_analyse_y); |
| 1739 |
analyse_lambda_z=(MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE*)erosion_lambda_z->get_suivante_analyse(it_analyse_z); |
| 1740 |
} |
| 1741 |
ajouter_analyse(erosion_lambda_app); |
| 1742 |
} |
| 1743 |
if(ves_lambda_x->get_analyse(Identifiant)->get_type()==MSTRUCT::TYPE_ANALYSE::CONDUCTIVITE_THERMIQUE && |
| 1744 |
ves_lambda_y->get_analyse(Identifiant)->get_type()==MSTRUCT::TYPE_ANALYSE::CONDUCTIVITE_THERMIQUE && |
| 1745 |
ves_lambda_z->get_analyse(Identifiant)->get_type()==MSTRUCT::TYPE_ANALYSE::CONDUCTIVITE_THERMIQUE) |
| 1746 |
{ |
| 1747 |
MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE* analyse_lambda_x=(MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE*)ves_lambda_x->get_analyse(Identifiant); |
| 1748 |
MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE* analyse_lambda_y=(MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE*)ves_lambda_y->get_analyse(Identifiant); |
| 1749 |
MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE* analyse_lambda_z=(MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE*)ves_lambda_z->get_analyse(Identifiant); |
| 1750 |
MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE* analyse_lambda_app = new MSTRUCT_ANALYSE_CONDUCTIVITE_THERMIQUE(Identifiant,analyse_lambda_x,analyse_lambda_y,analyse_lambda_z); |
| 1751 |
analyse_lambda_app->executer(); |
| 1752 |
ajouter_analyse(analyse_lambda_app); |
| 1753 |
} |
| 1754 |
} |
| 1755 |
else |
| 1756 |
{ |
| 1757 |
sprintf(ligne,"ERREUR -> %s",Identifiant.c_str()); |
| 1758 |
affiche(ligne); |
| 1759 |
} |
| 1760 |
} |
| 1761 |
ot_cpu.ajouter_etape((char*)"analyse"); |
| 1762 |
double temps_analyse; |
| 1763 |
ot_cpu.get_etape((char*)"analyse",temps_analyse); |
| 1764 |
change_temps_analyse(get_temps_analyse()+temps_analyse); |
| 1765 |
return 0; |
| 1766 |
|
| 1767 |
} |
| 1768 |
|
| 1769 |
|
| 1770 |
|
| 1771 |
|
| 1772 |
int MSTRUCT_VES::exporter_maillage_abaqus(char* dossier) |
| 1773 |
{ |
| 1774 |
std::ofstream f; |
| 1775 |
char file[1000]; |
| 1776 |
sprintf(file,"%s/noeuds",dossier); |
| 1777 |
f.open(file,std::ios::out); |
| 1778 |
f.precision(16); |
| 1779 |
f.setf(std::ios::showpoint); |
| 1780 |
f << "*NODE"<< std::endl; |
| 1781 |
LISTE_FEM_NOEUD::iterator it; |
| 1782 |
long index=1; |
| 1783 |
for (FEM_NOEUD* noeud=m_fem_maillage->get_premier_noeud(it);noeud;noeud=m_fem_maillage->get_suivant_noeud(it)) |
| 1784 |
{ |
| 1785 |
noeud->change_numero(index); |
| 1786 |
double *coord=noeud->get_coord(); |
| 1787 |
f << noeud->get_numero() << ", " << coord[0] << ", " << coord[1] << ", " << coord[2] << std::endl; |
| 1788 |
index++; |
| 1789 |
} |
| 1790 |
f.close(); |
| 1791 |
sprintf(file,"%s/elements",dossier); |
| 1792 |
f.open(file,std::ios::out); |
| 1793 |
f.precision(16); |
| 1794 |
f.setf(std::ios::showpoint); |
| 1795 |
index=1; |
| 1796 |
LISTE_FEM_ELEMENT3::iterator ittele3; |
| 1797 |
bool tetralin=false; |
| 1798 |
for (FEM_ELEMENT3* ele3=m_fem_maillage->get_premier_element3(ittele3);ele3;ele3=m_fem_maillage->get_suivant_element3(ittele3)) |
| 1799 |
{ |
| 1800 |
if(ele3->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_TETRA4) |
| 1801 |
{ |
| 1802 |
if(tetralin==false) |
| 1803 |
{ |
| 1804 |
tetralin=true; |
| 1805 |
f << "*ELEMENT,TYPE=C3D4,ELSET=tetralin"<< std::endl; |
| 1806 |
} |
| 1807 |
f << index << ", " |
| 1808 |
<< ele3->get_fem_noeud(0)->get_numero() << ", " |
| 1809 |
<< ele3->get_fem_noeud(1)->get_numero() << ", " |
| 1810 |
<< ele3->get_fem_noeud(2)->get_numero() << ", " |
| 1811 |
<< ele3->get_fem_noeud(3)->get_numero() << std::endl; |
| 1812 |
ele3->change_numero(index); |
| 1813 |
index++; |
| 1814 |
} |
| 1815 |
} |
| 1816 |
bool pentalin=false; |
| 1817 |
for (FEM_ELEMENT3* ele3=m_fem_maillage->get_premier_element3(ittele3);ele3;ele3=m_fem_maillage->get_suivant_element3(ittele3)) |
| 1818 |
{ |
| 1819 |
if(ele3->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_PENTA6) |
| 1820 |
{ |
| 1821 |
if(pentalin==false) |
| 1822 |
{ |
| 1823 |
pentalin=true; |
| 1824 |
f << "*ELEMENT,TYPE=C3D6,ELSET=pentalin"<< std::endl; |
| 1825 |
} |
| 1826 |
f << index << ", " |
| 1827 |
<< ele3->get_fem_noeud(0)->get_numero() << ", " |
| 1828 |
<< ele3->get_fem_noeud(1)->get_numero() << ", " |
| 1829 |
<< ele3->get_fem_noeud(2)->get_numero() << ", " |
| 1830 |
<< ele3->get_fem_noeud(3)->get_numero() << ", " |
| 1831 |
<< ele3->get_fem_noeud(4)->get_numero() << ", " |
| 1832 |
<< ele3->get_fem_noeud(5)->get_numero() << std::endl; |
| 1833 |
ele3->change_numero(index); |
| 1834 |
index++; |
| 1835 |
} |
| 1836 |
} |
| 1837 |
bool tetraquad=false; |
| 1838 |
for (FEM_ELEMENT3* ele3=m_fem_maillage->get_premier_element3(ittele3);ele3;ele3=m_fem_maillage->get_suivant_element3(ittele3)) |
| 1839 |
{ |
| 1840 |
if(ele3->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_TETRA10) |
| 1841 |
{ |
| 1842 |
if(tetraquad==false) |
| 1843 |
{ |
| 1844 |
tetraquad=true; |
| 1845 |
f << "*ELEMENT,TYPE=C3D10,ELSET=tetraquad"<< std::endl; |
| 1846 |
} |
| 1847 |
f << index << ", " |
| 1848 |
<< ele3->get_fem_noeud(0)->get_numero() << ", " |
| 1849 |
<< ele3->get_fem_noeud(2)->get_numero() << ", " |
| 1850 |
<< ele3->get_fem_noeud(4)->get_numero() << ", " |
| 1851 |
<< ele3->get_fem_noeud(9)->get_numero() << ", " |
| 1852 |
<< ele3->get_fem_noeud(1)->get_numero() << ", " |
| 1853 |
<< ele3->get_fem_noeud(3)->get_numero() << ", " |
| 1854 |
<< ele3->get_fem_noeud(5)->get_numero() << ", " |
| 1855 |
<< ele3->get_fem_noeud(6)->get_numero() << ", " |
| 1856 |
<< ele3->get_fem_noeud(7)->get_numero() << ", " |
| 1857 |
<< ele3->get_fem_noeud(8)->get_numero() << std::endl; |
| 1858 |
ele3->change_numero(index); |
| 1859 |
index++; |
| 1860 |
} |
| 1861 |
} |
| 1862 |
bool pentaquad=false; |
| 1863 |
f << "*ELEMENT,TYPE=C3D15,ELSET=pentaquad"<< std::endl; |
| 1864 |
for (FEM_ELEMENT3* ele3=m_fem_maillage->get_premier_element3(ittele3);ele3;ele3=m_fem_maillage->get_suivant_element3(ittele3)) |
| 1865 |
{ |
| 1866 |
if(ele3->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_PENTA15) |
| 1867 |
{ |
| 1868 |
if(pentaquad==false) |
| 1869 |
{ |
| 1870 |
pentaquad=true; |
| 1871 |
f << "*ELEMENT,TYPE=C3D15,ELSET=pentaquad"<< std::endl; |
| 1872 |
} |
| 1873 |
f << index << ", " |
| 1874 |
<< ele3->get_fem_noeud(0)->get_numero() << ", " |
| 1875 |
<< ele3->get_fem_noeud(2)->get_numero() << ", " |
| 1876 |
<< ele3->get_fem_noeud(4)->get_numero() << ", " |
| 1877 |
<< ele3->get_fem_noeud(9)->get_numero() << ", " |
| 1878 |
<< ele3->get_fem_noeud(11)->get_numero() << ", " |
| 1879 |
<< ele3->get_fem_noeud(13)->get_numero() << ", " |
| 1880 |
<< ele3->get_fem_noeud(1)->get_numero() << ", " |
| 1881 |
<< ele3->get_fem_noeud(3)->get_numero() << ", " |
| 1882 |
<< ele3->get_fem_noeud(5)->get_numero() << ", " |
| 1883 |
<< ele3->get_fem_noeud(10)->get_numero() << ", " |
| 1884 |
<< ele3->get_fem_noeud(12)->get_numero() << ", " |
| 1885 |
<< ele3->get_fem_noeud(14)->get_numero() << ", " |
| 1886 |
<< ele3->get_fem_noeud(6)->get_numero() << ", " |
| 1887 |
<< ele3->get_fem_noeud(7)->get_numero() << ", " |
| 1888 |
<< ele3->get_fem_noeud(8)->get_numero() << std::endl; |
| 1889 |
ele3->change_numero(index); |
| 1890 |
index++; |
| 1891 |
} |
| 1892 |
} |
| 1893 |
f.close(); |
| 1894 |
sprintf(file,"%s/BC_nsets",dossier); |
| 1895 |
f.open(file,std::ios::out); |
| 1896 |
f.precision(16); |
| 1897 |
f.setf(std::ios::showpoint); |
| 1898 |
BOITE_3D boite3D_ves = get_boite3d_ves(); |
| 1899 |
double eps = get_precision(); |
| 1900 |
TPL_MAP_ENTITE<MG_FACE*> plan_xy_z0; |
| 1901 |
TPL_MAP_ENTITE<MG_FACE*> plan_xy_z1; |
| 1902 |
TPL_MAP_ENTITE<MG_FACE*> plan_yz_x0; |
| 1903 |
TPL_MAP_ENTITE<MG_FACE*> plan_yz_x1; |
| 1904 |
TPL_MAP_ENTITE<MG_FACE*> plan_xz_y0; |
| 1905 |
TPL_MAP_ENTITE<MG_FACE*> plan_xz_y1; |
| 1906 |
std::map<unsigned long,MG_FACE*,std::less<unsigned long>>::iterator it_face; |
| 1907 |
for(MG_FACE *face = m_mg_geometrie->get_premier_face(it_face);face!=NULL;face=m_mg_geometrie->get_suivant_face(it_face)) |
| 1908 |
{ |
| 1909 |
double xyzmin[3]; |
| 1910 |
double xyzmax[3]; |
| 1911 |
face->get_xyz_min_max(xyzmin,xyzmax); |
| 1912 |
|
| 1913 |
if(OPERATEUR::egal(xyzmin[0],boite3D_ves.get_xmin(),eps) && OPERATEUR::egal(xyzmax[0],boite3D_ves.get_xmin(),eps)) plan_yz_x0.ajouter(face); |
| 1914 |
else if(OPERATEUR::egal(xyzmin[0],boite3D_ves.get_xmax(),eps) && OPERATEUR::egal(xyzmax[0],boite3D_ves.get_xmax(),eps)) plan_yz_x1.ajouter(face); |
| 1915 |
else if(OPERATEUR::egal(xyzmin[1],boite3D_ves.get_ymin(),eps) && OPERATEUR::egal(xyzmax[1],boite3D_ves.get_ymin(),eps)) plan_xz_y0.ajouter(face); |
| 1916 |
else if(OPERATEUR::egal(xyzmin[1],boite3D_ves.get_ymax(),eps) && OPERATEUR::egal(xyzmax[1],boite3D_ves.get_ymax(),eps)) plan_xz_y1.ajouter(face); |
| 1917 |
else if(OPERATEUR::egal(xyzmin[2],boite3D_ves.get_zmin(),eps) && OPERATEUR::egal(xyzmax[2],boite3D_ves.get_zmin(),eps)) plan_xy_z0.ajouter(face); |
| 1918 |
else if(OPERATEUR::egal(xyzmin[2],boite3D_ves.get_zmax(),eps) && OPERATEUR::egal(xyzmax[2],boite3D_ves.get_zmax(),eps)) plan_xy_z1.ajouter(face); |
| 1919 |
} |
| 1920 |
MG_SOMMET* sommet_x0y0z0=NULL; |
| 1921 |
MG_SOMMET* sommet_x1y0z0=NULL; |
| 1922 |
MG_SOMMET* sommet_x0y1z0=NULL; |
| 1923 |
MG_SOMMET* sommet_x1y1z0=NULL; |
| 1924 |
MG_SOMMET* sommet_x0y0z1=NULL; |
| 1925 |
MG_SOMMET* sommet_x1y0z1=NULL; |
| 1926 |
MG_SOMMET* sommet_x0y1z1=NULL; |
| 1927 |
MG_SOMMET* sommet_x1y1z1=NULL; |
| 1928 |
std::map<unsigned long,MG_SOMMET*,std::less<unsigned long>>::iterator it_sommet; |
| 1929 |
for(MG_SOMMET* som=m_mg_geometrie->get_premier_sommet(it_sommet);som!=NULL;som=m_mg_geometrie->get_suivant_sommet(it_sommet)) |
| 1930 |
{ |
| 1931 |
double xyz[3]; |
| 1932 |
som->get_point()->evaluer(xyz); |
| 1933 |
if(OPERATEUR::egal(xyz[0],boite3D_ves.get_xmin(),eps) && OPERATEUR::egal(xyz[1],boite3D_ves.get_ymin(),eps) && OPERATEUR::egal(xyz[2],boite3D_ves.get_zmin(),eps)) sommet_x0y0z0=som; |
| 1934 |
else if(OPERATEUR::egal(xyz[0],boite3D_ves.get_xmax(),eps) && OPERATEUR::egal(xyz[1],boite3D_ves.get_ymin(),eps) && OPERATEUR::egal(xyz[2],boite3D_ves.get_zmin(),eps)) sommet_x1y0z0=som; |
| 1935 |
else if(OPERATEUR::egal(xyz[0],boite3D_ves.get_xmin(),eps) && OPERATEUR::egal(xyz[1],boite3D_ves.get_ymax(),eps) && OPERATEUR::egal(xyz[2],boite3D_ves.get_zmin(),eps)) sommet_x0y1z0=som; |
| 1936 |
else if(OPERATEUR::egal(xyz[0],boite3D_ves.get_xmax(),eps) && OPERATEUR::egal(xyz[1],boite3D_ves.get_ymax(),eps) && OPERATEUR::egal(xyz[2],boite3D_ves.get_zmin(),eps)) sommet_x1y1z0=som; |
| 1937 |
else if(OPERATEUR::egal(xyz[0],boite3D_ves.get_xmin(),eps) && OPERATEUR::egal(xyz[1],boite3D_ves.get_ymin(),eps) && OPERATEUR::egal(xyz[2],boite3D_ves.get_zmax(),eps)) sommet_x0y0z1=som; |
| 1938 |
else if(OPERATEUR::egal(xyz[0],boite3D_ves.get_xmax(),eps) && OPERATEUR::egal(xyz[1],boite3D_ves.get_ymin(),eps) && OPERATEUR::egal(xyz[2],boite3D_ves.get_zmax(),eps)) sommet_x1y0z1=som; |
| 1939 |
else if(OPERATEUR::egal(xyz[0],boite3D_ves.get_xmin(),eps) && OPERATEUR::egal(xyz[1],boite3D_ves.get_ymax(),eps) && OPERATEUR::egal(xyz[2],boite3D_ves.get_zmax(),eps)) sommet_x0y1z1=som; |
| 1940 |
else if(OPERATEUR::egal(xyz[0],boite3D_ves.get_xmax(),eps) && OPERATEUR::egal(xyz[1],boite3D_ves.get_ymax(),eps) && OPERATEUR::egal(xyz[2],boite3D_ves.get_zmax(),eps)) sommet_x1y1z1=som; |
| 1941 |
} |
| 1942 |
f << "*NSET,NSET=coin_x0y0z0" << std::endl; |
| 1943 |
FEM_NOEUD* coin_x0y0z0 = (FEM_NOEUD*)(sommet_x0y0z0->get_lien_fem_maillage()->get(0)); |
| 1944 |
f << coin_x0y0z0->get_numero() << std::endl; |
| 1945 |
f << "*NSET,NSET=coin_x1y0z0" << std::endl; |
| 1946 |
FEM_NOEUD* coin_x1y0z0 = (FEM_NOEUD*)(sommet_x1y0z0->get_lien_fem_maillage()->get(0)); |
| 1947 |
f << coin_x1y0z0->get_numero() << std::endl; |
| 1948 |
f << "*NSET,NSET=coin_x0y1z0" << std::endl; |
| 1949 |
FEM_NOEUD* coin_x0y1z0 = (FEM_NOEUD*)(sommet_x0y1z0->get_lien_fem_maillage()->get(0)); |
| 1950 |
f << coin_x0y1z0->get_numero() << std::endl; |
| 1951 |
f << "*NSET,NSET=coin_x1y1z0" << std::endl; |
| 1952 |
FEM_NOEUD* coin_x1y1z0 = (FEM_NOEUD*)(sommet_x1y1z0->get_lien_fem_maillage()->get(0)); |
| 1953 |
f << coin_x1y1z0->get_numero() << std::endl; |
| 1954 |
f << "*NSET,NSET=coin_x0y0z1" << std::endl; |
| 1955 |
FEM_NOEUD* coin_x0y0z1 = (FEM_NOEUD*)(sommet_x0y0z1->get_lien_fem_maillage()->get(0)); |
| 1956 |
f << coin_x0y0z1->get_numero() << std::endl; |
| 1957 |
f << "*NSET,NSET=coin_x1y0z1" << std::endl; |
| 1958 |
FEM_NOEUD* coin_x1y0z1 = (FEM_NOEUD*)(sommet_x1y0z1->get_lien_fem_maillage()->get(0)); |
| 1959 |
f << coin_x1y0z1->get_numero() << std::endl; |
| 1960 |
f << "*NSET,NSET=coin_x0y1z1" << std::endl; |
| 1961 |
FEM_NOEUD* coin_x0y1z1 = (FEM_NOEUD*)(sommet_x0y1z1->get_lien_fem_maillage()->get(0)); |
| 1962 |
f << coin_x0y1z1->get_numero() << std::endl; |
| 1963 |
f << "*NSET,NSET=coin_x1y1z1" << std::endl; |
| 1964 |
FEM_NOEUD* coin_x1y1z1 = (FEM_NOEUD*)(sommet_x1y1z1->get_lien_fem_maillage()->get(0)); |
| 1965 |
f << coin_x1y1z1->get_numero() << std::endl; |
| 1966 |
TPL_MAP_ENTITE<MG_FACE*>::ITERATEUR it_face_plan; |
| 1967 |
f << "*NSET,NSET=xEQ0" << std::endl; |
| 1968 |
for(MG_FACE* face=plan_yz_x0.get_premier(it_face_plan);face!=NULL;face=plan_yz_x0.get_suivant(it_face_plan)) |
| 1969 |
{ |
| 1970 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=face->get_lien_fem_maillage(); |
| 1971 |
long nb_ele=lst_ele->get_nb(); |
| 1972 |
for(long i=0;i<nb_ele;i++) |
| 1973 |
{ |
| 1974 |
FEM_ELEMENT2* ele2 = (FEM_ELEMENT2*)lst_ele->get(i); |
| 1975 |
for(int j=0;j<ele2->get_nb_fem_noeud();j++) |
| 1976 |
{ |
| 1977 |
f << ele2->get_fem_noeud(j)->get_numero() << std::endl; |
| 1978 |
} |
| 1979 |
} |
| 1980 |
} |
| 1981 |
f << "*NSET,NSET=xEQ1" << std::endl; |
| 1982 |
for(MG_FACE* face=plan_yz_x1.get_premier(it_face_plan);face!=NULL;face=plan_yz_x1.get_suivant(it_face_plan)) |
| 1983 |
{ |
| 1984 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=face->get_lien_fem_maillage(); |
| 1985 |
long nb_ele=lst_ele->get_nb(); |
| 1986 |
for(long i=0;i<nb_ele;i++) |
| 1987 |
{ |
| 1988 |
FEM_ELEMENT2* ele2 = (FEM_ELEMENT2*)lst_ele->get(i); |
| 1989 |
for(int j=0;j<ele2->get_nb_fem_noeud();j++) |
| 1990 |
{ |
| 1991 |
f << ele2->get_fem_noeud(j)->get_numero() << std::endl; |
| 1992 |
} |
| 1993 |
} |
| 1994 |
} |
| 1995 |
f << "*NSET,NSET=yEQ0" << std::endl; |
| 1996 |
for(MG_FACE* face=plan_xz_y0.get_premier(it_face_plan);face!=NULL;face=plan_xz_y0.get_suivant(it_face_plan)) |
| 1997 |
{ |
| 1998 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=face->get_lien_fem_maillage(); |
| 1999 |
long nb_ele=lst_ele->get_nb(); |
| 2000 |
for(long i=0;i<nb_ele;i++) |
| 2001 |
{ |
| 2002 |
FEM_ELEMENT2* ele2 = (FEM_ELEMENT2*)lst_ele->get(i); |
| 2003 |
for(int j=0;j<ele2->get_nb_fem_noeud();j++) |
| 2004 |
{ |
| 2005 |
f << ele2->get_fem_noeud(j)->get_numero() << std::endl; |
| 2006 |
} |
| 2007 |
} |
| 2008 |
} |
| 2009 |
f << "*NSET,NSET=yEQ1" << std::endl; |
| 2010 |
for(MG_FACE* face=plan_xz_y1.get_premier(it_face_plan);face!=NULL;face=plan_xz_y1.get_suivant(it_face_plan)) |
| 2011 |
{ |
| 2012 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=face->get_lien_fem_maillage(); |
| 2013 |
long nb_ele=lst_ele->get_nb(); |
| 2014 |
for(long i=0;i<nb_ele;i++) |
| 2015 |
{ |
| 2016 |
FEM_ELEMENT2* ele2 = (FEM_ELEMENT2*)lst_ele->get(i); |
| 2017 |
for(int j=0;j<ele2->get_nb_fem_noeud();j++) |
| 2018 |
{ |
| 2019 |
f << ele2->get_fem_noeud(j)->get_numero() << std::endl; |
| 2020 |
} |
| 2021 |
} |
| 2022 |
} |
| 2023 |
f << "*NSET,NSET=zEQ0" << std::endl; |
| 2024 |
for(MG_FACE* face=plan_xy_z0.get_premier(it_face_plan);face!=NULL;face=plan_xy_z0.get_suivant(it_face_plan)) |
| 2025 |
{ |
| 2026 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=face->get_lien_fem_maillage(); |
| 2027 |
long nb_ele=lst_ele->get_nb(); |
| 2028 |
for(long i=0;i<nb_ele;i++) |
| 2029 |
{ |
| 2030 |
FEM_ELEMENT2* ele2 = (FEM_ELEMENT2*)lst_ele->get(i); |
| 2031 |
for(int j=0;j<ele2->get_nb_fem_noeud();j++) |
| 2032 |
{ |
| 2033 |
f << ele2->get_fem_noeud(j)->get_numero() << std::endl; |
| 2034 |
} |
| 2035 |
} |
| 2036 |
} |
| 2037 |
f << "*NSET,NSET=zEQ1" << std::endl; |
| 2038 |
for(MG_FACE* face=plan_xy_z1.get_premier(it_face_plan);face!=NULL;face=plan_xy_z1.get_suivant(it_face_plan)) |
| 2039 |
{ |
| 2040 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=face->get_lien_fem_maillage(); |
| 2041 |
long nb_ele=lst_ele->get_nb(); |
| 2042 |
for(long i=0;i<nb_ele;i++) |
| 2043 |
{ |
| 2044 |
FEM_ELEMENT2* ele2 = (FEM_ELEMENT2*)lst_ele->get(i); |
| 2045 |
for(int j=0;j<ele2->get_nb_fem_noeud();j++) |
| 2046 |
{ |
| 2047 |
f << ele2->get_fem_noeud(j)->get_numero() << std::endl; |
| 2048 |
} |
| 2049 |
} |
| 2050 |
} |
| 2051 |
f.close(); |
| 2052 |
|
| 2053 |
|
| 2054 |
sprintf(file,"%s/groupes_surfaces",dossier); |
| 2055 |
f.open(file,std::ios::out); |
| 2056 |
f.precision(16); |
| 2057 |
f.setf(std::ios::showpoint); |
| 2058 |
std::map<MG_ELEMENT_MAILLAGE*,FEM_ELEMENT_MAILLAGE*> map_correspondance_mg_fem; |
| 2059 |
for(FEM_ELEMENT3* ele3=m_fem_maillage->get_premier_element3(ittele3);ele3;ele3=m_fem_maillage->get_suivant_element3(ittele3)) |
| 2060 |
{ |
| 2061 |
MG_ELEMENT_MAILLAGE* mg_ele = ele3->get_mg_element_maillage(); |
| 2062 |
map_correspondance_mg_fem.insert(std::pair<MG_ELEMENT_MAILLAGE*,FEM_ELEMENT_MAILLAGE*>(mg_ele,ele3)); |
| 2063 |
} |
| 2064 |
f << "*SURFACE,NAME=surf_xEQ0, TYPE=ELEMENT" << std::endl; |
| 2065 |
for(MG_FACE* face=plan_yz_x0.get_premier(it_face_plan);face!=NULL;face=plan_yz_x0.get_suivant(it_face_plan)) |
| 2066 |
{ |
| 2067 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=face->get_lien_fem_maillage(); |
| 2068 |
long nb_ele=lst_ele->get_nb(); |
| 2069 |
for(long i=0;i<nb_ele;i++) |
| 2070 |
{ |
| 2071 |
FEM_ELEMENT2* ele2 = (FEM_ELEMENT2*)lst_ele->get(i); |
| 2072 |
if(ele2->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_TRIANGLE3) |
| 2073 |
{ |
| 2074 |
FEM_TRIANGLE3* tri3= (FEM_TRIANGLE3*)ele2; |
| 2075 |
MG_TRIANGLE* mgtri= (MG_TRIANGLE*)tri3->get_mg_element_maillage(); |
| 2076 |
MG_TETRA* mgtetra = mgtri->get_lien_tetra()->get(0); |
| 2077 |
FEM_TETRA4* tet4 = (FEM_TETRA4*)map_correspondance_mg_fem.find(mgtetra)->second; |
| 2078 |
if(mgtri==mgtetra->get_triangle1()) f << tet4->get_numero() << ", S1" << std::endl; |
| 2079 |
else if(mgtri==mgtetra->get_triangle2()) f << tet4->get_numero() << ", S2" << std::endl; |
| 2080 |
else if(mgtri==mgtetra->get_triangle3()) f << tet4->get_numero() << ", S3" << std::endl; |
| 2081 |
else if(mgtri==mgtetra->get_triangle4()) f << tet4->get_numero() << ", S4" << std::endl; |
| 2082 |
} |
| 2083 |
if(ele2->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_TRIANGLE6) |
| 2084 |
{ |
| 2085 |
FEM_TRIANGLE6* tri6= (FEM_TRIANGLE6*)ele2; |
| 2086 |
MG_TRIANGLE* mgtri= (MG_TRIANGLE*)tri6->get_mg_element_maillage(); |
| 2087 |
MG_TETRA* mgtetra = mgtri->get_lien_tetra()->get(0); |
| 2088 |
FEM_TETRA10* tet10 = (FEM_TETRA10*)map_correspondance_mg_fem.find(mgtetra)->second; |
| 2089 |
if(mgtri==mgtetra->get_triangle1()) f << tet10->get_numero() << ", S1" << std::endl; |
| 2090 |
else if(mgtri==mgtetra->get_triangle2()) f << tet10->get_numero() << ", S2" << std::endl; |
| 2091 |
else if(mgtri==mgtetra->get_triangle3()) f << tet10->get_numero() << ", S3" << std::endl; |
| 2092 |
else if(mgtri==mgtetra->get_triangle4()) f << tet10->get_numero() << ", S4" << std::endl; |
| 2093 |
} |
| 2094 |
} |
| 2095 |
} |
| 2096 |
f << "*SURFACE,NAME=surf_xEQ1, TYPE=ELEMENT" << std::endl; |
| 2097 |
for(MG_FACE* face=plan_yz_x1.get_premier(it_face_plan);face!=NULL;face=plan_yz_x1.get_suivant(it_face_plan)) |
| 2098 |
{ |
| 2099 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=face->get_lien_fem_maillage(); |
| 2100 |
long nb_ele=lst_ele->get_nb(); |
| 2101 |
for(long i=0;i<nb_ele;i++) |
| 2102 |
{ |
| 2103 |
FEM_ELEMENT2* ele2 = (FEM_ELEMENT2*)lst_ele->get(i); |
| 2104 |
if(ele2->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_TRIANGLE3) |
| 2105 |
{ |
| 2106 |
FEM_TRIANGLE3* tri3= (FEM_TRIANGLE3*)ele2; |
| 2107 |
MG_TRIANGLE* mgtri= (MG_TRIANGLE*)tri3->get_mg_element_maillage(); |
| 2108 |
MG_TETRA* mgtetra = mgtri->get_lien_tetra()->get(0); |
| 2109 |
FEM_TETRA4* tet4 = (FEM_TETRA4*)map_correspondance_mg_fem.find(mgtetra)->second; |
| 2110 |
if(mgtri==mgtetra->get_triangle1()) f << tet4->get_numero() << ", S1" << std::endl; |
| 2111 |
else if(mgtri==mgtetra->get_triangle2()) f << tet4->get_numero() << ", S2" << std::endl; |
| 2112 |
else if(mgtri==mgtetra->get_triangle3()) f << tet4->get_numero() << ", S3" << std::endl; |
| 2113 |
else if(mgtri==mgtetra->get_triangle4()) f << tet4->get_numero() << ", S4" << std::endl; |
| 2114 |
} |
| 2115 |
if(ele2->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_TRIANGLE6) |
| 2116 |
{ |
| 2117 |
FEM_TRIANGLE6* tri6= (FEM_TRIANGLE6*)ele2; |
| 2118 |
MG_TRIANGLE* mgtri= (MG_TRIANGLE*)tri6->get_mg_element_maillage(); |
| 2119 |
MG_TETRA* mgtetra = mgtri->get_lien_tetra()->get(0); |
| 2120 |
FEM_TETRA10* tet10 = (FEM_TETRA10*)map_correspondance_mg_fem.find(mgtetra)->second; |
| 2121 |
if(mgtri==mgtetra->get_triangle1()) f << tet10->get_numero() << ", S1" << std::endl; |
| 2122 |
else if(mgtri==mgtetra->get_triangle2()) f << tet10->get_numero() << ", S2" << std::endl; |
| 2123 |
else if(mgtri==mgtetra->get_triangle3()) f << tet10->get_numero() << ", S3" << std::endl; |
| 2124 |
else if(mgtri==mgtetra->get_triangle4()) f << tet10->get_numero() << ", S4" << std::endl; |
| 2125 |
} |
| 2126 |
} |
| 2127 |
} |
| 2128 |
f << "*SURFACE,NAME=surf_yEQ0, TYPE=ELEMENT" << std::endl; |
| 2129 |
for(MG_FACE* face=plan_xz_y0.get_premier(it_face_plan);face!=NULL;face=plan_xz_y0.get_suivant(it_face_plan)) |
| 2130 |
{ |
| 2131 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=face->get_lien_fem_maillage(); |
| 2132 |
long nb_ele=lst_ele->get_nb(); |
| 2133 |
for(long i=0;i<nb_ele;i++) |
| 2134 |
{ |
| 2135 |
FEM_ELEMENT2* ele2 = (FEM_ELEMENT2*)lst_ele->get(i); |
| 2136 |
if(ele2->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_TRIANGLE3) |
| 2137 |
{ |
| 2138 |
FEM_TRIANGLE3* tri3= (FEM_TRIANGLE3*)ele2; |
| 2139 |
MG_TRIANGLE* mgtri= (MG_TRIANGLE*)tri3->get_mg_element_maillage(); |
| 2140 |
MG_TETRA* mgtetra = mgtri->get_lien_tetra()->get(0); |
| 2141 |
FEM_TETRA4* tet4 = (FEM_TETRA4*)map_correspondance_mg_fem.find(mgtetra)->second; |
| 2142 |
if(mgtri==mgtetra->get_triangle1()) f << tet4->get_numero() << ", S1" << std::endl; |
| 2143 |
else if(mgtri==mgtetra->get_triangle2()) f << tet4->get_numero() << ", S2" << std::endl; |
| 2144 |
else if(mgtri==mgtetra->get_triangle3()) f << tet4->get_numero() << ", S3" << std::endl; |
| 2145 |
else if(mgtri==mgtetra->get_triangle4()) f << tet4->get_numero() << ", S4" << std::endl; |
| 2146 |
} |
| 2147 |
if(ele2->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_TRIANGLE6) |
| 2148 |
{ |
| 2149 |
FEM_TRIANGLE6* tri6= (FEM_TRIANGLE6*)ele2; |
| 2150 |
MG_TRIANGLE* mgtri= (MG_TRIANGLE*)tri6->get_mg_element_maillage(); |
| 2151 |
MG_TETRA* mgtetra = mgtri->get_lien_tetra()->get(0); |
| 2152 |
FEM_TETRA10* tet10 = (FEM_TETRA10*)map_correspondance_mg_fem.find(mgtetra)->second; |
| 2153 |
if(mgtri==mgtetra->get_triangle1()) f << tet10->get_numero() << ", S1" << std::endl; |
| 2154 |
else if(mgtri==mgtetra->get_triangle2()) f << tet10->get_numero() << ", S2" << std::endl; |
| 2155 |
else if(mgtri==mgtetra->get_triangle3()) f << tet10->get_numero() << ", S3" << std::endl; |
| 2156 |
else if(mgtri==mgtetra->get_triangle4()) f << tet10->get_numero() << ", S4" << std::endl; |
| 2157 |
} |
| 2158 |
} |
| 2159 |
} |
| 2160 |
f << "*SURFACE,NAME=surf_yEQ1, TYPE=ELEMENT" << std::endl; |
| 2161 |
for(MG_FACE* face=plan_xz_y1.get_premier(it_face_plan);face!=NULL;face=plan_xz_y1.get_suivant(it_face_plan)) |
| 2162 |
{ |
| 2163 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=face->get_lien_fem_maillage(); |
| 2164 |
long nb_ele=lst_ele->get_nb(); |
| 2165 |
for(long i=0;i<nb_ele;i++) |
| 2166 |
{ |
| 2167 |
FEM_ELEMENT2* ele2 = (FEM_ELEMENT2*)lst_ele->get(i); |
| 2168 |
if(ele2->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_TRIANGLE3) |
| 2169 |
{ |
| 2170 |
FEM_TRIANGLE3* tri3= (FEM_TRIANGLE3*)ele2; |
| 2171 |
MG_TRIANGLE* mgtri= (MG_TRIANGLE*)tri3->get_mg_element_maillage(); |
| 2172 |
MG_TETRA* mgtetra = mgtri->get_lien_tetra()->get(0); |
| 2173 |
FEM_TETRA4* tet4 = (FEM_TETRA4*)map_correspondance_mg_fem.find(mgtetra)->second; |
| 2174 |
if(mgtri==mgtetra->get_triangle1()) f << tet4->get_numero() << ", S1" << std::endl; |
| 2175 |
else if(mgtri==mgtetra->get_triangle2()) f << tet4->get_numero() << ", S2" << std::endl; |
| 2176 |
else if(mgtri==mgtetra->get_triangle3()) f << tet4->get_numero() << ", S3" << std::endl; |
| 2177 |
else if(mgtri==mgtetra->get_triangle4()) f << tet4->get_numero() << ", S4" << std::endl; |
| 2178 |
} |
| 2179 |
if(ele2->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_TRIANGLE6) |
| 2180 |
{ |
| 2181 |
FEM_TRIANGLE6* tri6= (FEM_TRIANGLE6*)ele2; |
| 2182 |
MG_TRIANGLE* mgtri= (MG_TRIANGLE*)tri6->get_mg_element_maillage(); |
| 2183 |
MG_TETRA* mgtetra = mgtri->get_lien_tetra()->get(0); |
| 2184 |
FEM_TETRA10* tet10 = (FEM_TETRA10*)map_correspondance_mg_fem.find(mgtetra)->second; |
| 2185 |
if(mgtri==mgtetra->get_triangle1()) f << tet10->get_numero() << ", S1" << std::endl; |
| 2186 |
else if(mgtri==mgtetra->get_triangle2()) f << tet10->get_numero() << ", S2" << std::endl; |
| 2187 |
else if(mgtri==mgtetra->get_triangle3()) f << tet10->get_numero() << ", S3" << std::endl; |
| 2188 |
else if(mgtri==mgtetra->get_triangle4()) f << tet10->get_numero() << ", S4" << std::endl; |
| 2189 |
} |
| 2190 |
} |
| 2191 |
} |
| 2192 |
f << "*SURFACE,NAME=surf_zEQ0, TYPE=ELEMENT" << std::endl; |
| 2193 |
for(MG_FACE* face=plan_xy_z0.get_premier(it_face_plan);face!=NULL;face=plan_xy_z0.get_suivant(it_face_plan)) |
| 2194 |
{ |
| 2195 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=face->get_lien_fem_maillage(); |
| 2196 |
long nb_ele=lst_ele->get_nb(); |
| 2197 |
for(long i=0;i<nb_ele;i++) |
| 2198 |
{ |
| 2199 |
FEM_ELEMENT2* ele2 = (FEM_ELEMENT2*)lst_ele->get(i); |
| 2200 |
if(ele2->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_TRIANGLE3) |
| 2201 |
{ |
| 2202 |
FEM_TRIANGLE3* tri3= (FEM_TRIANGLE3*)ele2; |
| 2203 |
MG_TRIANGLE* mgtri= (MG_TRIANGLE*)tri3->get_mg_element_maillage(); |
| 2204 |
MG_TETRA* mgtetra = mgtri->get_lien_tetra()->get(0); |
| 2205 |
FEM_TETRA4* tet4 = (FEM_TETRA4*)map_correspondance_mg_fem.find(mgtetra)->second; |
| 2206 |
if(mgtri==mgtetra->get_triangle1()) f << tet4->get_numero() << ", S1" << std::endl; |
| 2207 |
else if(mgtri==mgtetra->get_triangle2()) f << tet4->get_numero() << ", S2" << std::endl; |
| 2208 |
else if(mgtri==mgtetra->get_triangle3()) f << tet4->get_numero() << ", S3" << std::endl; |
| 2209 |
else if(mgtri==mgtetra->get_triangle4()) f << tet4->get_numero() << ", S4" << std::endl; |
| 2210 |
} |
| 2211 |
if(ele2->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_TRIANGLE6) |
| 2212 |
{ |
| 2213 |
FEM_TRIANGLE6* tri6= (FEM_TRIANGLE6*)ele2; |
| 2214 |
MG_TRIANGLE* mgtri= (MG_TRIANGLE*)tri6->get_mg_element_maillage(); |
| 2215 |
MG_TETRA* mgtetra = mgtri->get_lien_tetra()->get(0); |
| 2216 |
FEM_TETRA10* tet10 = (FEM_TETRA10*)map_correspondance_mg_fem.find(mgtetra)->second; |
| 2217 |
if(mgtri==mgtetra->get_triangle1()) f << tet10->get_numero() << ", S1" << std::endl; |
| 2218 |
else if(mgtri==mgtetra->get_triangle2()) f << tet10->get_numero() << ", S2" << std::endl; |
| 2219 |
else if(mgtri==mgtetra->get_triangle3()) f << tet10->get_numero() << ", S3" << std::endl; |
| 2220 |
else if(mgtri==mgtetra->get_triangle4()) f << tet10->get_numero() << ", S4" << std::endl; |
| 2221 |
} |
| 2222 |
} |
| 2223 |
} |
| 2224 |
f << "*SURFACE,NAME=surf_zEQ1, TYPE=ELEMENT" << std::endl; |
| 2225 |
for(MG_FACE* face=plan_xy_z1.get_premier(it_face_plan);face!=NULL;face=plan_xy_z1.get_suivant(it_face_plan)) |
| 2226 |
{ |
| 2227 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=face->get_lien_fem_maillage(); |
| 2228 |
long nb_ele=lst_ele->get_nb(); |
| 2229 |
for(long i=0;i<nb_ele;i++) |
| 2230 |
{ |
| 2231 |
FEM_ELEMENT2* ele2 = (FEM_ELEMENT2*)lst_ele->get(i); |
| 2232 |
if(ele2->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_TRIANGLE3) |
| 2233 |
{ |
| 2234 |
FEM_TRIANGLE3* tri3= (FEM_TRIANGLE3*)ele2; |
| 2235 |
MG_TRIANGLE* mgtri= (MG_TRIANGLE*)tri3->get_mg_element_maillage(); |
| 2236 |
MG_TETRA* mgtetra = mgtri->get_lien_tetra()->get(0); |
| 2237 |
FEM_TETRA4* tet4 = (FEM_TETRA4*)map_correspondance_mg_fem.find(mgtetra)->second; |
| 2238 |
if(mgtri==mgtetra->get_triangle1()) f << tet4->get_numero() << ", S1" << std::endl; |
| 2239 |
else if(mgtri==mgtetra->get_triangle2()) f << tet4->get_numero() << ", S2" << std::endl; |
| 2240 |
else if(mgtri==mgtetra->get_triangle3()) f << tet4->get_numero() << ", S3" << std::endl; |
| 2241 |
else if(mgtri==mgtetra->get_triangle4()) f << tet4->get_numero() << ", S4" << std::endl; |
| 2242 |
} |
| 2243 |
if(ele2->get_type_entite()==MAGIC::TYPE_ENTITE::IDFEM_TRIANGLE6) |
| 2244 |
{ |
| 2245 |
FEM_TRIANGLE6* tri6= (FEM_TRIANGLE6*)ele2; |
| 2246 |
MG_TRIANGLE* mgtri= (MG_TRIANGLE*)tri6->get_mg_element_maillage(); |
| 2247 |
MG_TETRA* mgtetra = mgtri->get_lien_tetra()->get(0); |
| 2248 |
FEM_TETRA10* tet10 = (FEM_TETRA10*)map_correspondance_mg_fem.find(mgtetra)->second; |
| 2249 |
if(mgtri==mgtetra->get_triangle1()) f << tet10->get_numero() << ", S1" << std::endl; |
| 2250 |
else if(mgtri==mgtetra->get_triangle2()) f << tet10->get_numero() << ", S2" << std::endl; |
| 2251 |
else if(mgtri==mgtetra->get_triangle3()) f << tet10->get_numero() << ", S3" << std::endl; |
| 2252 |
else if(mgtri==mgtetra->get_triangle4()) f << tet10->get_numero() << ", S4" << std::endl; |
| 2253 |
} |
| 2254 |
} |
| 2255 |
} |
| 2256 |
f.close(); |
| 2257 |
sprintf(file,"%s/groupes_elements",dossier); |
| 2258 |
f.open(file,std::ios::out); |
| 2259 |
f.precision(16); |
| 2260 |
f.setf(std::ios::showpoint); |
| 2261 |
std::map<long,MG_CG_GROUPE_FORME*>::iterator it_groupe_forme; |
| 2262 |
for(MG_CG_GROUPE_FORME* groupe_forme=m_mgcg_modele->get_premier_mgcg_groupe_forme(it_groupe_forme);groupe_forme!=NULL;groupe_forme=m_mgcg_modele->get_suivant_mgcg_groupe_forme(it_groupe_forme)) |
| 2263 |
{ |
| 2264 |
f << "*ELSET,ELSET=" << groupe_forme->get_nom() << std::endl; |
| 2265 |
TPL_MAP_ENTITE<MG_VOLUME*> tpl_map_volume = groupe_forme->get_tpl_map_volume(); |
| 2266 |
TPL_MAP_ENTITE<MG_VOLUME*>::ITERATEUR it_volume; |
| 2267 |
for(MG_VOLUME* volume=tpl_map_volume.get_premier(it_volume);volume!=NULL;volume=tpl_map_volume.get_suivant(it_volume)) |
| 2268 |
{ |
| 2269 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=volume->get_lien_fem_maillage(); |
| 2270 |
long nb_ele=lst_ele->get_nb(); |
| 2271 |
for(long i=0;i<nb_ele;i++) |
| 2272 |
{ |
| 2273 |
FEM_ELEMENT3* ele3 = (FEM_ELEMENT3*)lst_ele->get(i); |
| 2274 |
f << ele3->get_numero() << std::endl; |
| 2275 |
} |
| 2276 |
} |
| 2277 |
} |
| 2278 |
|
| 2279 |
|
| 2280 |
|
| 2281 |
|
| 2282 |
MG_CG_GROUPE_FORME* groupe_forme_particule=m_mgcg_modele->get_mgcg_groupe_forme((char*)"Particule"); |
| 2283 |
if(groupe_forme_particule!=NULL) |
| 2284 |
{ |
| 2285 |
|
| 2286 |
sprintf(file,"%s/particules",dossier); |
| 2287 |
f.open(file,std::ios::out); |
| 2288 |
f.precision(16); |
| 2289 |
f.setf(std::ios::showpoint); |
| 2290 |
std::ofstream f2; |
| 2291 |
char file2[1000]; |
| 2292 |
sprintf(file2,"%s/infos_particules",dossier); |
| 2293 |
f2.open(file2,std::ios::out); |
| 2294 |
f2.precision(16); |
| 2295 |
f2.setf(std::ios::showpoint); |
| 2296 |
std::map<long,MG_CG_FORME*>::iterator it_forme; |
| 2297 |
if(groupe_forme_particule->get_premiere_mgcg_forme(it_forme)->get_mgcg_info((char*)"CENTRE")!=NULL) |
| 2298 |
{ |
| 2299 |
f2 << "# centre_x centre_y centre_z rayon position_relative" << std::endl; |
| 2300 |
} |
| 2301 |
else if(groupe_forme_particule->get_premiere_mgcg_forme(it_forme)->get_mgcg_info((char*)"EXTREMITE")!=NULL) |
| 2302 |
{ |
| 2303 |
f2 << "# extremite_x extremite_y extremite_z rayon longueur axe_x axe_y axe_z position_relative" << std::endl; |
| 2304 |
} |
| 2305 |
std::ofstream f_bord; |
| 2306 |
char file3[1000]; |
| 2307 |
sprintf(file3,"%s/particules_bord",dossier); |
| 2308 |
f_bord.open(file3,std::ios::out); |
| 2309 |
f_bord.precision(16); |
| 2310 |
f_bord.setf(std::ios::showpoint); |
| 2311 |
std::ofstream f_interieur; |
| 2312 |
char file4[1000]; |
| 2313 |
sprintf(file4,"%s/particules_interieur",dossier); |
| 2314 |
f_interieur.open(file4,std::ios::out); |
| 2315 |
f_interieur.precision(16); |
| 2316 |
f_interieur.setf(std::ios::showpoint); |
| 2317 |
std::ofstream f_liste; |
| 2318 |
char file5[1000]; |
| 2319 |
sprintf(file5,"%s/groupes_elements_particules",dossier); |
| 2320 |
f_liste.open(file5,std::ios::out); |
| 2321 |
f_liste.precision(16); |
| 2322 |
f_liste.setf(std::ios::showpoint); |
| 2323 |
long p=1; |
| 2324 |
for(MG_CG_FORME* forme=groupe_forme_particule->get_premiere_mgcg_forme(it_forme);forme!=NULL;forme=groupe_forme_particule->get_suivante_mgcg_forme(it_forme)) |
| 2325 |
{ |
| 2326 |
if(forme->get_type_forme()==MG_CG_FORME::TYPE_FORME::VOLUME) |
| 2327 |
{ |
| 2328 |
f << "*ELSET,ELSET=P_" << p << std::endl; |
| 2329 |
if(forme->get_mgcg_info((char*)"CENTRE")!=NULL) |
| 2330 |
{ |
| 2331 |
MG_CG_INFO_VCT_DOUBLE* centre = (MG_CG_INFO_VCT_DOUBLE*)forme->get_mgcg_info((char*)"CENTRE"); |
| 2332 |
MG_CG_INFO_DOUBLE* rayon = (MG_CG_INFO_DOUBLE*)forme->get_mgcg_info((char*)"RAYON"); |
| 2333 |
MG_CG_INFO_STRING* pos_rel = (MG_CG_INFO_STRING*)forme->get_mgcg_info((char*)"POSITION_RELATIVE"); |
| 2334 |
std::vector<double> vct_centre = centre->get_vct_valeur(); |
| 2335 |
f2 << p << " " |
| 2336 |
<< vct_centre.at(0) << " " |
| 2337 |
<< vct_centre.at(1) << " " |
| 2338 |
<< vct_centre.at(2) << " " |
| 2339 |
<< rayon->get_valeur() << " " |
| 2340 |
<< pos_rel->get_valeur() << std::endl; |
| 2341 |
bool au_bord; |
| 2342 |
if(pos_rel->get_valeur()=="AU_BORD") au_bord=true; |
| 2343 |
else au_bord=false; |
| 2344 |
MG_CG_FORME_VOLUME* forme_volume = (MG_CG_FORME_VOLUME*)forme; |
| 2345 |
MG_VOLUME* volume = forme_volume->get_mg_volume(); |
| 2346 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=volume->get_lien_fem_maillage(); |
| 2347 |
long nb_ele=lst_ele->get_nb(); |
| 2348 |
if(au_bord) f_bord << "*ELSET,ELSET=P_" << p << std::endl; |
| 2349 |
else f_interieur << "*ELSET,ELSET=P_" << p << std::endl; |
| 2350 |
f_liste << "*ELSET,ELSET=P_" << p << std::endl; |
| 2351 |
for(long i=0;i<nb_ele;i++) |
| 2352 |
{ |
| 2353 |
FEM_ELEMENT3* ele3 = (FEM_ELEMENT3*)lst_ele->get(i); |
| 2354 |
f << ele3->get_numero() << std::endl; |
| 2355 |
if(au_bord)f_bord << ele3->get_numero() << std::endl; |
| 2356 |
else f_interieur << ele3->get_numero() << std::endl; |
| 2357 |
f_liste << ele3->get_numero() << std::endl; |
| 2358 |
} |
| 2359 |
p++; |
| 2360 |
} |
| 2361 |
else if(forme->get_mgcg_info((char*)"EXTREMITE")!=NULL) |
| 2362 |
{ |
| 2363 |
MG_CG_INFO_VCT_DOUBLE* extremite = (MG_CG_INFO_VCT_DOUBLE*)forme->get_mgcg_info((char*)"EXTREMITE"); |
| 2364 |
MG_CG_INFO_DOUBLE* rayon = (MG_CG_INFO_DOUBLE*)forme->get_mgcg_info((char*)"RAYON"); |
| 2365 |
MG_CG_INFO_DOUBLE* longueur = (MG_CG_INFO_DOUBLE*)forme->get_mgcg_info((char*)"LONGUEUR"); |
| 2366 |
MG_CG_INFO_STRING* pos_rel = (MG_CG_INFO_STRING*)forme->get_mgcg_info((char*)"POSITION_RELATIVE"); |
| 2367 |
std::vector<double> vct_extremite = extremite->get_vct_valeur(); |
| 2368 |
MG_CG_INFO_VCT_DOUBLE* axe = (MG_CG_INFO_VCT_DOUBLE*)forme->get_mgcg_info((char*)"AXE"); |
| 2369 |
std::vector<double> vct_axe = axe->get_vct_valeur(); |
| 2370 |
f2 << p << " " |
| 2371 |
<< vct_extremite.at(0) << " " |
| 2372 |
<< vct_extremite.at(1) << " " |
| 2373 |
<< vct_extremite.at(2) << " " |
| 2374 |
<< rayon->get_valeur() << " " |
| 2375 |
<< longueur->get_valeur() << " " |
| 2376 |
<< vct_axe.at(0) << " " |
| 2377 |
<< vct_axe.at(1) << " " |
| 2378 |
<< vct_axe.at(2) << " " |
| 2379 |
<< pos_rel->get_valeur() << std::endl; |
| 2380 |
bool au_bord; |
| 2381 |
if(pos_rel->get_valeur()=="AU_BORD") au_bord=true; |
| 2382 |
else au_bord=false; |
| 2383 |
MG_CG_FORME_VOLUME* forme_volume = (MG_CG_FORME_VOLUME*)forme; |
| 2384 |
MG_VOLUME* volume = forme_volume->get_mg_volume(); |
| 2385 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=volume->get_lien_fem_maillage(); |
| 2386 |
long nb_ele=lst_ele->get_nb(); |
| 2387 |
if(au_bord) f_bord << "*ELSET,ELSET=P_" << p << std::endl; |
| 2388 |
else f_interieur << "*ELSET,ELSET=P_" << p << std::endl; |
| 2389 |
f_liste << "*ELSET,ELSET=P_" << p << std::endl; |
| 2390 |
for(long i=0;i<nb_ele;i++) |
| 2391 |
{ |
| 2392 |
FEM_ELEMENT3* ele3 = (FEM_ELEMENT3*)lst_ele->get(i); |
| 2393 |
f << ele3->get_numero() << std::endl; |
| 2394 |
if(au_bord)f_bord << ele3->get_numero() << std::endl; |
| 2395 |
else f_interieur << ele3->get_numero() << std::endl; |
| 2396 |
f_liste << ele3->get_numero() << std::endl; |
| 2397 |
} |
| 2398 |
p++; |
| 2399 |
} |
| 2400 |
} |
| 2401 |
else if(forme->get_type_forme()==MG_CG_FORME::TYPE_FORME::MULTI_VOLUME) |
| 2402 |
{ |
| 2403 |
f << "*ELSET,ELSET=P_" << p << std::endl; |
| 2404 |
MG_CG_INFO_VCT_DOUBLE* centre = (MG_CG_INFO_VCT_DOUBLE*)forme->get_mgcg_info((char*)"CENTRE"); |
| 2405 |
MG_CG_INFO_DOUBLE* rayon = (MG_CG_INFO_DOUBLE*)forme->get_mgcg_info((char*)"RAYON"); |
| 2406 |
MG_CG_INFO_STRING* pos_rel = (MG_CG_INFO_STRING*)forme->get_mgcg_info((char*)"POSITION_RELATIVE"); |
| 2407 |
std::vector<double> vct_centre = centre->get_vct_valeur(); |
| 2408 |
f2 << p << " " |
| 2409 |
<< vct_centre.at(0) << " " |
| 2410 |
<< vct_centre.at(1) << " " |
| 2411 |
<< vct_centre.at(2) << " " |
| 2412 |
<< rayon->get_valeur() << " " |
| 2413 |
<< pos_rel->get_valeur() << std::endl; |
| 2414 |
bool au_bord; |
| 2415 |
if(pos_rel->get_valeur()=="AU_BORD") au_bord=true; |
| 2416 |
else au_bord=false; |
| 2417 |
MG_CG_FORME_MULTI_VOLUME* forme_multi_volume = (MG_CG_FORME_MULTI_VOLUME*)forme; |
| 2418 |
std::map<long,MG_VOLUME*>::iterator it_volume; |
| 2419 |
for(MG_VOLUME* volume=forme_multi_volume->get_premier_mg_volume(it_volume);volume!=NULL;volume=forme_multi_volume->get_suivant_mg_volume(it_volume)) |
| 2420 |
{ |
| 2421 |
TPL_LISTE_ENTITE<FEM_ELEMENT_MAILLAGE*> *lst_ele=volume->get_lien_fem_maillage(); |
| 2422 |
long nb_ele=lst_ele->get_nb(); |
| 2423 |
if(au_bord) f_bord << "*ELSET,ELSET=P_" << p << std::endl; |
| 2424 |
else f_interieur << "*ELSET,ELSET=P_" << p << std::endl; |
| 2425 |
for(long i=0;i<nb_ele;i++) |
| 2426 |
{ |
| 2427 |
FEM_ELEMENT3* ele3 = (FEM_ELEMENT3*)lst_ele->get(i); |
| 2428 |
f << ele3->get_numero() << std::endl; |
| 2429 |
if(au_bord)f_bord << ele3->get_numero() << std::endl; |
| 2430 |
else f_interieur << ele3->get_numero() << std::endl; |
| 2431 |
} |
| 2432 |
} |
| 2433 |
p++; |
| 2434 |
} |
| 2435 |
} |
| 2436 |
f_bord.close(); |
| 2437 |
f_interieur.close(); |
| 2438 |
f_liste.close(); |
| 2439 |
f2.close(); |
| 2440 |
f.close(); |
| 2441 |
} |
| 2442 |
return 0; |
| 2443 |
|
| 2444 |
} |
| 2445 |
|
| 2446 |
|
| 2447 |
int MSTRUCT_VES::enregistrer(char* fichier_ves) |
| 2448 |
{ |
| 2449 |
m_ves_file->enregistrer(fichier_ves); |
| 2450 |
return 0; |
| 2451 |
|
| 2452 |
} |
| 2453 |
|
| 2454 |
int MSTRUCT_VES::enregistrer(char *fichier_ves,char* fichier_magic) |
| 2455 |
{ |
| 2456 |
m_ves_file->change_nom_fichier_magic(fichier_magic); |
| 2457 |
m_ves_file->enregistrer(fichier_ves); |
| 2458 |
m_mg_gestionnaire->enregistrer(fichier_magic); |
| 2459 |
return 0; |
| 2460 |
} |
| 2461 |
|
| 2462 |
void MSTRUCT_VES::active_affichage(fonction_affiche* fonc) |
| 2463 |
{ |
| 2464 |
fonc_affiche = fonc; |
| 2465 |
affichageactif = 1; |
| 2466 |
} |
| 2467 |
|
| 2468 |
void MSTRUCT_VES::affiche(char* message) |
| 2469 |
{ |
| 2470 |
if(affichageactif==1) fonc_affiche(message); |
| 2471 |
} |
| 2472 |
|
| 2473 |
|
| 2474 |
|
| 2475 |
|
| 2476 |
|
| 2477 |
|
